How do i change the input

If your device is stuck on the CD button and you're unable to change it, try the following steps:

1. Check the device's manual: First, consult the manual for your device to see if there are any specific instructions for changing the input source. Some devices may require a particular button sequence or menu selection to switch inputs.
2. Power cycle the device: Turn off the device and unplug it from the power source for a few minutes. Then, plug it back in and turn it on again. This may help to reset the device and allow you to change the input source.
3. Check the remote control: Ensure that the batteries in the remote control are working properly and that you are using the correct remote control for the device. Some devices may require a specific remote control to change inputs.
4. Try a different input: If you're unable to change the input from the CD button, try selecting a different input button such as the radio or auxiliary input. This may help to reset the device and allow you to change the input source.
5. Contact the manufacturer: If none of the above steps work, contact the manufacturer for assistance. They may be able to provide additional troubleshooting steps or suggest repairs or replacement options.

Hopefully, one of these steps will help you resolve the issue and allow you to change the input source on your device.

Changes how? does it go to another input, change volume level etc?

Search Results

How do I change the input on my television? ' FAQ ' Cogeco ...

https://www.cogeco.ca/.../how-do-i-change-the-input-on-my-tele...

CogecoClick on the TV button near the top of the remote. Click on the video source button on the bottom left corner of the remote. Using the arrow keys to highlight/select the inputyou want. Some televisions may require pressing the source button multiple times to change the inputs.

Understanding Inputs - Harmony Support - MyHarmony

https://support.myharmony.com/.../understanding-different-input-changi...
Televisions, AV receivers, soundbars and other home electronic devices switch ...Devices with toggle (or cycle) inputs have a single button on their remote that ... In the below example, you would press the Source button to bring up a list of ...

Changing AV input on TV using Sky remote ' AVForums

www.avforums.com > ... > Satellite TV, Sky TV & FreeSat
Changing AV input on TV using Sky remote. Discussion in 'Satellite TV, Sky TV ...VSX-924 LG simplink changing AV source to TV. Posted By djrobmac In AV ...

Selecting the DVD, VCR, Game Console, HDTV, Camera, or ...

This safe was shipped with a factory Master Code of 1-2-3-4-5-6-7-8.


If you changed the Master Code you will need to use the code you changed it to.


Deleting your current User Codes:
Input * - * lock will beep twice
input 6-6-6-# lock will beep twice
Input current Master Code - # lock will beep twice
Input user number - # lock will beep twice (not user code, user number is which user number you want to delete 1,2,3,4 or 5)
Re-input user number - # light stays green for 3 seconds

Example: * - * - 6 - 6 - 6 - # Master Code - # - 5 - # - 5 #
This will delete user 5
Unsuccessful code change: five beeps, repeat the steps.


Changing User Codes: Code length can be 3 to 8 digits long
Input * - * lock will beep twice
Input 4 - 4 - 4 - # lock will beep twice
Input Current User Code - # lock will beep twice
Input User Number - #
Input New User Code - # lock will beep twice
Re-input New User Code - # light stays green for 3 seconds

Example: * - * - 3 - 3 - 3 -# - User Code 2 - # - 2 - # -New User Code - # - New User Code - #

That example will change user code 2.
Unsuccessful Code Change: five beeps, repeat the steps.

There are other things you can do with the MSL-500 lock that comes on the MFL-2014E. You can change the master code, activate user codes, change user codes, delete user codes, set single user or dual user modes (dual user modes requires two user codes to be entered each time you want to open the safe, set the time delay.

The Mesa safe company has a website which does have the operating instructions for the MSL-500 electronic lock. A Google search of "Mesa MSL-500 Operating Instructions" would get you there quickly.

Hai ! This is possible : )

Type in Chinese, Japanese, and other character-based languages

To type text on your computer in character-based languages, such as Chinese and Japanese, follow these steps:

[Source: http://windows.microsoft.com/en-us/windows-vista/Type-in-Chinese-Japanese-and-other-character-based-languages]

1. Add the language as an input language. If you want to use an input method editor (IME), make sure you select it when you add the input language. For more information, see Add an input language.
   Add an input language

   You can edit documents in multiple languages by changing the language (the input language) in which you type. Input languages are included with Windows, but you need to add them to your list of languages before you can use them.
   

   1. Open Regional and Language Options by clicking the Start button , clicking Control Panel, clicking Clock, Language, and Region, and then clicking Regional and Language Options.
      

   2. Click the Keyboards and Languages tab, and then click Change keyboards.
      

   3. Under Installed services, click Add.
      

   4. Double-click the language you want to add, double-click the text services you want to add, select the text services options you want to add, and then click OK.
      

1. Change your input language to the language you installed. For more information, see Change your input language.
   

Change your input language

The input language is a setting in Windows that controls the language you use to type information on your computer. Before you can change an input language, you need to add that language to Windows. For more information, see Add an input language.
To change the input language

Click the Input language button on the Language bar, and then click the input language you want to use.

Language bar Note

If you don't see the Language bar, right-click the taskbar, point to Toolbars, and then click Language bar.

1. Change your keyboard layout to the desired layout. For more information, see Change your keyboard layout.
   

Change your keyboard layout

You can customize your keyboard for a specific language or format by changing the keyboard layout. The layout controls which characters appear on the screen when you press the keys on your keyboard. Some input languages have several keyboard layouts; others have only one. For example, you can change your keyboard layout from the English QWERTY format to the English Dvorak format. After you change the layout, the characters on your screen might not correspond to the characters on your keyboard keys.

Before you can change the keyboard layout, you must add the input language and keyboard layout that you want to use to Windows. For more information, see Add an input language.
Hide all To change the keyboard layout

1. On the Language bar, click the Input language button, and then select an input language.
   

   
   Language bar

2. Click the Keyboard layout button, and then select a keyboard layout.
   

Note

If you don't see the Language bar, right-click the taskbar, point to Toolbars, and then click Language bar.
To change the keyboard layout on the Welcome screen

On the Welcome screen, click the Keyboard layout button , and then select a keyboard layout.

TIP:
After you are done you can switch between Japanese and English very easily by manually pressing the on screen buttons or using keyboard commands like SHIFT+ALT to switch between Japanese (???) and the Alphabet.

you need a service repair, on that ckt there's an IC function as memory IC replace that part and all your program well be stored. can found that ic most likely near switch botton area 4 or 8 pin IC.

Try channel button to 1-2-3--99-98-1-2-3 up & down it should come between 0 & 1

Tuner is only analog. As for the Video 1 input you need to go into the menu and change it to the digital port you want to use (optical, coaxial or HDMI) you can set only one input to each digital input port.

on your remote there is a input button if you
have the factory remote.press this and will
change inputs.

I believe changing stations is triggering the protection on receiver. When you go to another input and back you give time for the protection circuitry to release speakers again. Try muting your receiver before changing channels. Good luck!