- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
According to Pride's troubleshooting documents the service indicator (wrench icon) will flash when a fault is detected by the dynamic controller.
The number of flashes, followed by a 2 second pause, indicates the issue. You will need to count the flashes to determine the cause and a possible solution.
When you turn the chair on and move the jostick the wrench light will flash you need to count the number of times it flashes to determine whats wrong ie 4 flashes pause 4 flashes pause. If its 4 flashes then you have a motor problem see my tips on flash codes to determine the problem. Whatever the problem is you will have to have the chair fixed by a tech or the provider that sold you your chair Hope this helps
This is not a solution, but a start. There should be a tech sheet somewhere with the dishwaser. Often it is stuck to the back of the kick plate. In this, or possibly in your owners manual, there should be a list of "error codes" This should explain what the seven flashes mean.
Good luck
That means Code 17, one long flash means 1, seven short flashes means 7. The code is for the Vehicle Speed Sensor (VSS) Have it checked and replaced if necessary.
1. ON-FLASH-FLASH = No Ram or ram not seen 2. ON-FLASH-ON = Ram has a problem 3. FLASH-FLASH-FLASH = Motherboard failure (replace board) 4. FLASH-ON-ON = CPU Fault/failure 5. FLASH-ON-FLASH = LCD detect failure/fault 6. ON-ON-FLASH = MINI pci card (controller) failure/fault 7. FLASH-FLASH-OFF = Keyboard fault/failure 8. FLASH-OFF-FLASH = USB FAILURE 9. FLASH-FLASH-ON = Video BIOS or BIOS issue 10. ON-FLASH-FLASH = Modem issue
Depending on the blinking code, you might just need to re-seat or replace your RAM or your CPU. But then again, you could have a more severe motherboard issue.
A blinking clean light that flashes 7 times and cannot be reset, occurs when the electronic control does not detect a water temperature increase during the main wash. This could be an indication of a failed heating element, in line thermostat, electronic control board and/or wiring. This problem can also occur if the main wash pump becomes clogged and it not spraying sufficiently. I hope this helps you.
PS A faulty door latch can also cause this error code.
NOTE: There should be a tech sheet located behind the lower panel under the door that lists all the fault codes and how to troubleshoot them. If you need further assistance, please let me know.
There is an error code that flashes on front of TV. which is in this case an error 7 which is power related. Also there is a gree LED on the power supply that will flash an error code also. If u look on the power supply U will see a list of numbers 1-13 which list the error codes and what they mean.Usually if it flashes 1-9 its usually cheaper to just buy another TV. because the Power supply , Y-main, X-main will probably run $300 plus core charge.
×