WHERE CAN i GET THE SPRING FOR THE PULL START ON ETQ 3000 GENERATOR

I assume it has a flat wound spring ? if so and it broke at the end close to the center where often it hooks in with two slots cut into the spring to fit the attaching slot. If your a bit mechanically inclined you can remake the end of the broken spring and re-install it. If it attaches by a circular bend like a closed or partially open hook it can still be rebuilt but you would need to be familiar with the use of heating torches and metal hardening. Beyond that I would be surprised if it wasn't available at the Honda dealer.

Hope this helps
BR

Never heard of an etq Honda generator,if is a Honda generator any Honda dealer should be able to help you. If its a Honda knock off ,some Honda springs will work.