SOURCE: belkin router blocking programs
The firewall is probably set to block. The IP address for Belkin is 192.168.2.1. you can log in and set the firewall. Also, if it is a program like gaming , you may have to open a port for it.
http://www.portforward.com/networking/staticip.htm
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309
SOURCE: Im having trouble connecting my
BLU RAY :: BELKIN
Step 1:Connect Modem - Router - Computer (Wired)
Step 2:Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer
Step 3:On the Left click firewall
Step 4:Leave the Password blank and click submit
Step 5:Disable it and click apply changes
Step 6:Scan and connect in the BLU RAY
Step 7: Get the IP Address of the BLU RAY
Step 8:Open Router Setup in the Computer
Step 9:On the left under Firewall Click DMZ
Step 10:Enable the IP Address of the BLU RAY in it
Step 11:Click Apply Changes
Step 13:On the left Under Utilities click System settings
Step 14:Scroll down to the bottom
Step 15:Enable UPnP
Step 16:Click apply changes
Step 17:Test the connection ,Check the NAT
If working then let me know
======================================...
If it is still not working
Open Router setup
At the middle Under internet settings check the WAN IP
IF it starts with 192.168. or 172.16 Then you will have to contact your internet service and ask them to bridge the modem
SOURCE: Belkin g mimo router blocking netflix streaming
Hello,
There is not much protection you will be getting from the firewall of that router. You could let it be disabled and if you feel that the router firewall should be enabled then you might have to check if there is any firewall update for this product. You could log on to.. http://www.belkin.com/support and enter your product details including the version number you will be able to download the firmware.
Hope this helped.
SOURCE: can i hook my belkin router to a jvc tv so i can
Hi,
No. Here's what you need to do. If you have an HDTV or LCDTV, connect it to your computer and connect the computer to your belkin router. That way, your computer will get signal from belkin routerand display it on the JVC tv you have.
Thank you for visiting FixYa!
598 views
Usually answered in minutes!
×