Clean mode electric current went off was off 10mentis when it came back on oven didnt

This is a general answer and not specific. The oven thinks is still in the cleaning mode. If it has one, push the clean button again. Set the oven to a regular bake cycle.

You need to replace the control panel

It will remain locked until the temperature is safely as low as it should be. You just have to wait and be patient.

HI. this is a failed oven temp sensor or relay board.

Oven temp sensed; over 600F sensed by control in time of day mode, bake mode, or over 900F sensed in clean mode.


Ohm test the oven temperature sensor, if OK, change power relay board.

I hit the cleaning button instead of the broiler and the oven lock went in mode so now it thinks it is cleaning but I can't close it and it won't shut off the cleaning mode. What can I do?

How long does it take for the door lock to go off once the cleaning light goes off?

Press and hold CUSTOM BROIL for 5 seconds. A
tone will sound and “°F” will appear on the lower oven display for
3 seconds.

A complete owners manual can be downloaded from
http://shared.whirlpoolcorp.com/product_literature/search.jsp

Thanks for using Fix Ya, please take the time to rate this solution.

clarkco

I have a whirlpool accubake wall oven. Half-way through baking a pie ,unknown to me, the oven went to the self-clean mode , the door locked and the pie started to burn. I tried to turn the oven off but it would not cut off. I immediately ran to the house's main power and turned off the oven breaker. I waited for a short time to let the oven cool enough to open the door and get the burned pie out, then went back to turn my breaker back on and the oven (even though in the off mode) started heating again with the bottom unit turning red again. I had to then go back and pull the power. We tried this several times trying to push the off button but the oven will not go off until we throw the breaker. Help please!

the problem was fixed by opening the panel between the oven cavity and the touch panel just behinf the door. you can look through the grill but to trip the reset you must unscrew the panel. you will find the reset back behind the wires Looks a red button nestled on top not very open but it should be there> i do have to say i found a step by step description on this site. but right now i can't tell you who exactly he was.