Kode m2 bizhub 184

see if this link helps you out... konica minolta bizhub 195 error code M2 Google Search

There are parts in your printer that are coming to the end of their useful life. If your not on a service contract or still in warranty. You can bring it to a technician or buy a new one. Most of the time on small printers it's more cost effective to replace rather than repair.

http://www.copytechnet.com/forums/konica-minolta/62595-konika-minolta-bizhub-163-error-code-m2.html

replace the drum and developer and then reset the counter

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Have you replace the developer and the drum. First clear the counters for the drum and developer and then replace the drum and developer, then run the required F8. if not the machine will start showing bad copies showing codes. If you clear the counters and don't do anything then the copier will think the parts are new set voltages as required when in fact they are old and will cause problems. So recommend you do the right thing get a tech out to replace the drum and developer

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Utility stop 0 0 stop 0 1 allows U to sevice mode. Go to clear data and clear supply count. M2 will be cleared.

Konika Minolta BizHub 163 - Error Code M2
Press the Utility button,
then Stop 0 0
then press again Stop 0 1
then scroll to Clear Data, and then Supplies Data and clear.
You must be aware that clearing this counter clears the drum, developer and other counters.

Bizhub 164 (M2) error

konika minolta184 ineed reset pogram call m2

I Have a Konika Minolta bizhub 211. I had been trying this solution for repairing m2 call. but the code is appear till now. anyone help me. please give me solution step by step.
Thanks