Using RCA cables but lost remote and can't change channel TO AV on Sanyo DS27800

There is no option to do this without its remote control.

U using the RCA AV cable Y,R,W plug into those tv video input holes wright?Tries another RCA Y,R,W AV cable,see if it work?U have tools like a soldering iron,a roll of solders,also can u do basic soldering?Tries take some alchahol clean the Yellow input hole and take the tv aparts resolders it connections joints,now the video out it should work again,if not yellow input hole might be shorted require replacing.

Check the tv manual buttons,have a input button.No.Try website like Remotes.com to buy an original remote so can find out with input ur VCR/DVD device unit hook up into like video input like 1 or 2.

hi,

any big box store or radio shack should have a suitable replacement. your cable or directv or dish remote can be programmed for the tv depending on which provider you have. go to the website of which one you have and go to "remote codes" section if you dont have cable or dish then go to walmart and get a universal. the more you pay, the more features you will get. look closely at the packaging. thrift stores usually have a whole wall of old remotes in bags you can start looking there too. if you can find a sanyo vcr it may have some tv functions that might have the tv codes on it.
jm

I'm not sure if this will work with your TV. Some TVs will go to the other inputs if you go all the way through the channels and keep going.

you need to reprogram the channels on the tv,thats why the tv cant get out of the video 1

IM GUESSING THIS MIGHT BE AN RCA TELEVISION? if you dont have an rca in hook up on the tv give up and buy a new tv or you can find an older item what it is is a switch that has an rca input and a coax output it was used to hook up the older video game systems it is still sold in most stores and that will work if you do have rca inputs and lost the remote you need to get a universal remote to switch the input on certain older rca tv's you could go to channel 00 and it would set it to the input with the switch you shoudl be able to use it by putting the tv on channel 3

actually the tuner is in the vcr mode.
to get the channels to set,you have to autoprogram the tuner,and then they can be changed using the up down buttons.
rca make a universal remote for 10 bucks that will run that vcr

Using the tv remote (or selecting TV button on cable universal remote) hit the INFO button. It remove the channel # for me. I might have a different model.

The only way your going to change the video mode is with the original remote. If you need another remote go to http://remotes.com or call 1800 remotes Theres a button on the upper left hand side of the remote called video mode. A universal most of the time will not work this function. You could ask around to your friends and buddies or relitives if anyone has a working Sanyo remote or go to a local retailer that sells Sanyo and see if he would let you borrow one for a little while so you can switch out of the video mode. Good Luck