Missing line in cord what type of cord is needed and can i get at store?

hello nancy, what is the type of your power cord? i put a picture so you can see what type of cord.. you can buy a power cord at your local electronics store or appliances store..

I could not locate the exact replacement power cord for your toaster oven. If the power cord is a plug -in type, you can look on line, do a search " small appliance power cords", but I'm not sure if you will be able to match up the correct cord. I think your best bet is to go to a local. old fashioned. hardware store or to a small appliance repair center. Take the original power cord with you to match it up.

This should be the type

Hi and welcome to FixYa, I am Kelly.

These cords (unless the magnetic type are available at most hardware stores ("Woods" / Woods Industries or Coleman Cable are the product brand names.) These cords are usually in the area of extension cords.

Having said that... The distance between the pins is the difference. There are 1/2" cords 11/16" plug cords and 1 1/16" cords. I need to know the distance between the pins center to center of your fryer connector terminals.

Most Fryers use a 3 Ft cord and roasters use a 6 ft Cord. You cna use a 6 ft cord but do NOT use it for an extended period. The cord you purchase must be wire gage 16/2 NOT 18/2 in wire size.
The 18/2 gage will only handle 1250 watts.

The part number of the cord will be either 0290 or 09326 (You can net "IMAGE search" these for sources)

Here is one source for the cord.
http://www.hardwareandtools.com/Coleman-Cable-0290-6-Foot-Black-Appliance-Cord-0429928.html

If you have the magnetic base / end plug let me know and I will find you the correct plug.
Just repsond here and say you need the magnetic recepticle cord.

Thanks for choosing FixYa,
Kelly

Go to any say goodwill store or thrift store, the power cords they have any one should fit.

Hello
If you have a frost plug type heater the cord does unplug from the unit.
if its a in line hose type heater chances are you wont be able to replace just the cord.
Most auto parts stores cary replacement parts
RD

You can buy a new one at: http://www.1800customersupport.com/products.aspx?type=pad&view=389&p=73&sc=5.

Depending on your model system, it may or may not be possible. I included the two different methods to change the ring tone below depending on your system. Give it a try.

KX-TDA Systems
KX-TD Systems
Press PROGRAM
Program Press the CO Line key you wish to change
Press the same key again, enter the tone number (01 through 30)
You will hear the tone associated with the tone type number. For example, if you press 02, you will hear the tone associated with tone type 22. Press each number (01-30) until you hear the tone you desire.
Press STORE
The tone is now stored for that line on that phone only.
Press PROGRAM 99 (or PAUSE 99 if you do not have a PROGRAM button
Press the CO Line key you wish to change
Press the same key again, enter the tone number (1 through 8)
You will hear the tone associated with the tone type number. For example, if you press 2, you will hear the tone associated with tone type 2. Press each number (1-8) until you hear the tone you desire.
Press STORE
The tone is now stored for that line on that phone only.

The required wires to attach the camcorder to the computer are NOT included. You will either need to purchase a FireWire cable, or a USB cable to connect it.

Copy directly from the manual: TONE/PULSE Your phone is set to TONE at the factory. Set the TONE/PULSE selection to PULSE if you have pulse (rotary). If you don't know which type of service you have (pulse or tone), check with your phone company. To program TONE/PULSE for all 3 lines: 1. Press STORE/IN 2. Press 0 for PULSE or Press 1 for TONE 3. Press STORE/IN 4. Press TONE To program TONE/PULSE for each line individually: 1. Press STORE/IN 2. Press 0 for PULSE or Press 1 for TONE 3. Press STORE/IN 4. Press LOWER 5. Press line number (1, 2, or 3)