At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you need to unplug power cord from back of tv and let it set for awhile then plug back into the back of the tv i also have a plasma and it sometimes does that also
Hi, two things.. Either your remote needs new batteries, or you need to switch off your tele and allow it to reboot for a few minutes before switching it back on, I hope this helps
LCDs are worth it to have as to a Plasma set as plasma tvs do need time to warm up LCD and LED tvs dont have that warm up time to wait for things to smooth out however if you wish to have the tv serviced it is fully up to the owner of that TV now mind you there is also OLED tvs out there in the market as well and with the cost of LCD tvs going down to about 500 bucks you might be more interested in that but thats my IMO on buying a TV set
I had the same problem with my Hitachi 42edt41. It was the Y sustain pcb. Large board on the left as you are looking at it from the back. Costs about $750. for the part.
Bill
×