Washing Machines Logo

Related Topics:

Posted on Nov 05, 2007

Washing machine will not spin makes loud humming noise

My kenmore washing machine just stopped spinning. It sounds like the motor is working it make a loud humming noise. Thank you coina

  • 5 more comments 
  • ckf102 Nov 05, 2007

    Can you direct me to how I may replace the motor coupling. Is this something I can do myself? Is this an expensive part?

  • Anonymous Mar 15, 2014

    Whirlpool easytronic 1250 spin, washing machine makes sounds as though its going to wash, makes pumpling sounds then just stops, light for wash is on but the door light flashes on and off instead of staying on as though the programme has finished.

  • Anonymous Mar 16, 2014

    my washing machine makes a squealing noise when spinning

  • Anonymous Mar 18, 2014

    It only makes a loud noise when its spinning

  • Anonymous Mar 22, 2014

    Sounds like a banging noise on certain wash programmes

  • Anonymous Mar 22, 2014

    my kitchenAid washing machine makes loud sounds when spinning

  • Anonymous Mar 29, 2014

    Loud noise when spinning

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 19 Answers
  • Posted on Nov 05, 2007
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Oct 31, 2007
Answers
19
Questions
0
Helped
23004
Points
35

Motor coupling needs to be replaced

  • Anonymous Nov 05, 2007

    part cost u like $10 on ebay its hard to explain how 2 repair by texting

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a Kenmore top loading large capacity washer model 1028882791. It began washing as usual then began to making a loud humming sound. The agitation stopped. It only makes a loud humming sound. I...

The humming sound is coming from the drive motor running but unable to drive the agitator nor the basket to spin. The drive motor is definitely running as the drain function works because of the fact that drain pump is directly coupled with the rear spline of the motor. The drain pump works in either direction as long as the motor runs. The problem is obviously a broken motor coupler which transfers the mechanical energy of the motor to the transmission. The solution then is to replace the broken coupler. Click on the link below for the detailed step-by-step procedure in replacing the motor coupler.

Replacing Motor Coupler on Kenmore and Whirlpool Top-Load Washing Machines
1helpful
1answer

Kenmore washing machine fills with water then stops

turn the motor to see if it moves it sound like the motor
1helpful
2answers

Washer won't agitate or spin out.

Well it is ethier Belt, Cluch ,motor ,Or transmission. But it does sound like your transmission . The loud clunk is the brake in the gear case ( Trans.). It might have broken off.
0helpful
1answer

Top load washer machine will not agitate

Hi There,
Check to see that the belt is being driven by the motor when it goes into the wash cycle. Let me know if this helps and thank you for using FixYa!
0helpful
1answer

Motor is humming loudly.

Motors hum, and your right, it could be no worse than normal.

I would be suspect that there is a gear stripped in the gearcase, since this is a direct drive washing machine.

Reassemble the motor back onto the washer. Run it through a cycle manually (rotate the timer by hand) until the motor turns, then look to see if it's turning. If it is, or even more so, if it pumps water out of the tub, then it is probably the stripped out gearcase.

Reply with you findings and more advice.
0helpful
2answers

Loud clicking noise - wont agitate or spin

I had the same clicking noise. Turned out to be the coupling between the motor and transmission. A $15 plus 1 hour labor fix
0helpful
2answers

Loud noise when spinning

the only part that makes a loud noise is your bearings m8 other than that could be a bra wire stuck inbetween your drum and casing m8
Not finding what you are looking for?

2,973 views

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...