SUBSCRIPTION IS UP TO DATE,XTR3 HAS BEEN REFRESHED, UPDATED MANY TIMES, YET STII GET CHANGE CHANNEL FROM 000 SID WITH TURN DIAL

here is link to manual copy and paste
https://www.ask-tsc.com/pdf/KX-TA824.Operating%20Manual.pdf

Welcome to FixYa!
Remove the batteries/power line connecting to the Sirius Radio. Connect it back after 2 minutes. This will refresh the device without loosing any saved settings/informations and will unlock the channels.

Thank you for using FixYa. Have a great day. Jas247

To set date and time on your phone system you must first enter user programming mode.
Using a display phone with the receiver hung up.
Press PROGRAM
Dial ** 1234 (SYS PROG NO)
Dial 000 (DATE AND TIME)
Press SP-PHONE key once (display shows current date)
Normally this is correct if not dial the changes in with your keypad. Use the FWD\DND key to
move forward on the display and the CONF key to move backwards.
Press AUTO DIAL STORE (Confirmation tone)
Press SP-PHONE key once (display shows current time flashing on hour)
Dial new hour (Two digits) Use the FWD\DND key to move forward on the display and the
CONF key to move backwards. Dial in any changes and when your done:
Press AUTO DIAL STORE (Confirmation tone)
Press HOLD (SYS PROG NO)
Press PROGRAM
Your phone should be back to normal.

Having the same problem in my 2009 Malibu. Have received 8 refresh signals and talked to the XM Techs 4 times. Taking car to dealership on Monday. Highly frustrated.

Get your subscription refunded. There is nothing wrong with your radio. if they can't make it work, don't pay them.

From extension 101 or 100 (the main phone) press PROG dial **1234 000 and ENTER Change the date if you have to, if not, press NEXT. Dial the time as 4 digits and press ENTER on the Navigator key if the AM/PM is correct, then press HOLD EXIT.

Carl

To set date and time on your phone system you must first enter user programming mode.
Using a display phone with the receiver hung up.
Press PROGRAM
Dial ** 1234 (SYS PROG NO)
Dial 000 (DATE AND TIME)
Press SP-PHONE key once (display shows current date)
Normally this is correct if not dial the changes in with your keypad. Use the FWD\DND key to
move forward on the display and the CONF key to move backwards.
Press AUTO DIAL STORE (Confirmation tone)
Press SP-PHONE key once (display shows current time flashing on hour)
Dial new hour (Two digits) Use the FWD\DND key to move forward on the display and the
CONF key to move backwards. Dial in any changes and when your done:
Press AUTO DIAL STORE (Confirmation tone)
Press HOLD (SYS PROG NO)
Press PROGRAM
Your phone should be back to normal.

This is what worked for me :
program, **, passw 1234, you change the time/date, and then to store, press Autodial or store button.
Hope this helps!
Caroll

my advice? get limewire

1) press "Program", then * *, then 1234,
2) press "0 0 0",
3) press "speaker" two times,
4) change the time
5) press "store".
6) pick up the receiver to complete the change.

Do this change on the "lead" phone and it will reset all the others on your system. Not exactly an intuitive process to be sure!