I left my camera in my car for a short time then took it out to video nnow it has colored lines on the screen and its all blurry

It sounds as though it may have become overheated. If it continues to show this problem and the camera is not too warm when used then it may have been damaged by the heat. Temps in cars can get very hot. It could also be a physical damage issue if the camera was not in a case and slide around unprotected.

camera has a photosensitive panel...it might get damaged...

Check the site linked below, and compare the screen shots. It has many kind of defective screen-shots to plasma displays. Compare them to that of yours, and make sure about the faulty board or others. http://electronicshelponline.blogspot.com/

The TV requires thorough servicing and this might require attention by a qualified service technician.

Does that set have whats called a color wheel, if so that maybe you problem, and replacement is how you fix it.

Projection TV sets have several common problems listed below.

Problem #1) Convergence

Symptoms:

• Screen Looks 3D
• Colors wont align
• Screen may look distorted
• No Audio/Video - TV makes a chirping sound.

Problem #2 CRT Fluid has clouded over. Symtoms

• Dull looking video
• White looking video
• Halos around objects
• Red/Orange looking video

You can see some examples and find a fix here...

http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

See this link.

Hi,
Camera symptoms shows bad CCD Imager in camera and this part needs to be replaced.
Sony has announced free of cost repair scheme for such problem in DSC-T1 models. Please click Sony Support for details.
Thank you.

you have a shorted green CRT that is affecting the other crts the short is internat to the crt that leaves what is called retrace lines. if the set is more than three years old then replace all three guns.

o i see i had this prob , its condensation/liquid inside the camera , i suggest that you let it dry out , possibly with a hair dryer but DONT LEAVE IT TOO LONG the camera is sensitive so short period of hot air and letting it cool