Repair parts bunn btx b

This is a common question for the BTX-B.
It's a commercial brewer that needs to be pre-filled prior to turning on.. It also needs to be filled again with a full carafe for it to brew properly. I have a link below that will explain how to set up and use this brewer.
Aloha, ukeboy57
https://www.bing.com/videos/search?q=bunn+grx-b&&view=detail&mid=E6D1ADD550DA3DA5B120E6D1ADD550DA3DA5B120&&FORM=VDRVRV

Www.bunn.com

You would need to go to the Bunn website.

ONLY BTX MOBO FIT BTX CASES
AND ALL BTX PC ETC stink max. horrible and is failed IDEA,now DOA , none sold new.

EVERYONE HATED IT SO IT DIED WELL DESERVED *****.
A01 IS NOT MOBO NAME EVER.
HERE IS WHAT SUX, see ,my stinks list:

1: MOBO IS BACKWARDS'(and right side case access.)
2; CAUSING ALL GPU CARDS TO BE PUT IN UPSIDE DOWN.AND NOW THE GPU CARD HITS THE LAME BTX FAN SHROUD OR THE GPU CARDS FANS IS BLOCKED RENDERING IT USELESS.

3: THE CPU HEAT SINK AND FAN ARE ALL TOTALLY NOT NORMAL OR STANDARD. IT IS BTX ODD DUCK NOT ATX NORMAL.

WHY MESS WITH BTX NOBODY ON EARTH WANTS BTX
WHY DO THIS.?? BUY PC 2010 OR NEWER I3, UP.

THE WORST ARE THE DELLS. (AND ENDED)
4: cpu SITS CROSSWISE, 45 DEGREES OFF, MAKING ALL COOLING CUSTOM. HATE MAX . (SAWS AND HAMMER TIME)

WHY NOT GO UATX,MICRO ATX LIKE EVERYONE ELSE/?
5: b200 NONE STANDARD PSU. (WOW)
6: B200 LOW PROFILE CASE CAN NOT RUN FASTER GPU;.
I'D SAY ONLY B200 PARTS FIT THERE, PERIOD.
(Except DDR and CPU are standards)

Warranty is 1 year parts and labor, 2 years parts only and 3 years for control boards. That model does not have a control board. You could have a bad thermostat, bad high limit, bad thermal link or bad element. Without you having a multimeter anSd the knowledge of how to use it properly it would be best to replace the unit.

the screws are under the flip lid where you ad water. sounds like your heating element is shorted most common problem with the bunn not hard to replace call bunn for replacement or order on line. hope this helps you. .lee

Hi, Sounds like a boiler therostat or faulty boiler. Dazza REPAIRER

Call Bunn customer service. Those folks are super nice and will help you resolve the problem.

I work 4 BUNN and we have a flow restrictor sprayhead that might help. If you send me your address we can send one out to you.