Xerox 7120 tray 5 job held - Xerox WorkCentre 7120/P Printer

Fault Code 092-315: ATC Fail [K] (Black Toner)
https://www.support.xerox.com/en-us/article/en/1244657.html

Try these solutions

• Power Off the Printer Using the Power Switch on the Lower Center Tray. Wait Two Minutes and Then Power On the Printer
• Remove the Toner Cartridge, Gently Shake the Cartridge 10 Times, and Then Re-install the Cartridge
• WorkCentre 7120/7125: Replace the Appropriate Drum Cartridge(s)

http://www.copytechnet.com/forums/xerox/121809-xerox-wc-7120-error-code-042-345-a.html

Chain Description 001 Cover and Door Interlocks 002 Touch Screen / Control Panel 003, 041, 045, 123 Machine Communications 004 Drives 005 Duplex Automatic Document Feeder (DADF) 061, 062 Scanner, DADF and ROS 007 Paper Supply 008 Paper Feed 009, 089 Xerographics 010, 011 Fuser, Copy Exit 012, 013, 047, 112 Finisher 016, 124, 127 Configuration, Software, Memory, Hard Drives, Color Server, DFE 018 Network Communications 020 Fax, Software 021, 121 Foreign Interface 022 Job Timers 024, 026, 027, 033 Job Parameters 034, 035, 036, 133, 134 Fax Communication 042 Motor, Fan, Sensor 071 Tray 1 Misfeed 072 Tray 2 Misfeed 073 Tray 3 Misfeed 074 Tray 4 Misfeed 075 Tray 5 Misfeed (Bypass Tray) 077 Paper Path Jam 078 High Capacity Feeder 083, 084 Fax Jobs 091 Drum Cartridge 092, 093 ATC, ADC, Toner 094 IBT, BTR 102 Job Queue 103, 116 Software

If I am not wrong you are asking about Banner Sheet? I guess. close all your open applications and go to Device and printers, then right click on the 7120 printer and select printing preferences, then go to advanced Tab. select + next to Paper / output. you will see (print ID on Banner Sheet) select it and go for the option Disable job ID. make your changes save by pressing ok.

bonjour j'ai un code erreur sur ma xerox workcenter 7125 je trouve pas de solution si qlq px m'aide merci d'avance code 093-320

i need activation code xerox workcentre 7120

ERROR 093-320

An error occurred when using Tray 1. Turn the machine off and on. Contact the Xerox Welcome Center if the problem persists.

> Go to devices and printes
> Right Click on Xerox printer
> Click on printing Preferences
> Go to Paper size and Click on Other Size
> And then open Original Document Size
> In Appear Menu Click New
> a new window appear write any name
> in Height 11.69
> in Width 8.27
> Click OK

80% held problem will solved