How would I find a downloadable copy of a manual for my komatsu d21-7 bulldozer?

SOURCE: service manual for 42h81

Email me privately and I can send you one via Pando... You will need Pando to download it but it in itself is a free download... Be precise in what you're asking when you email, I get more than 3000 emails a day so it will be impossible to figure out what you need without you telling me.
Bill

William Rayburn, CET
Premium Technologies
PO Box 442
Long Beach, WA. 98631
360-642-4993
[email protected]

SOURCE: Panasonic PT-50LC14 Service Manual

did you try the panasonic website??? if not e-mail me i have one, and could hopefully answer any question you have.......spqr163@yahoo

SOURCE: looking for a service manual for a 57h82

I have Toshiba 50H81 manual and can email you, if you need that.

SOURCE: I needA user manual i can download for free

Download from Toshiba USA, here is the direct link to your televisions free user manual. Just save the pdf file to your computer or print it out.

http://www.tacp.toshiba.com/tacpassets-images/models/30df56/docs/30DF56_om_e.pdf

SOURCE: Need service manuel free download site or codes for circuit board to reset to manufacture settings if possible on convergence problem

You can get a free manual if you buy a kit from www.TvRepairKits.com . They will typicaly email one to you if you just ask.

Here are some of the most common symptoms and example photos of a convergence problem

• Screen looks 3D
• Colors don't line up
• One or more colors can't be adjusted when using the convergence menu.
• Screen is bowed or warped.

Here are some photos of convergence problems.




Here is a quick test....

Using your original remote go-to the tv settings then goto the convergence section.

Try to adjust the red and then the blue convergence.

You should be able to move them up, down, left, and right.

If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.

SOLUTION

You will need to replace the convergence chips and possibly some convergence resistors and pico fuses. Its a fairly easy DIY job or you can call in a pro. If you want to do the repair yourself check the site www.TvRepairKits.com. Their kits include a photo instruction guide, original OEM Sanyo STK chips, convergence resistors, pico fuses, thermal paste, email/phone support, etc.