My pc screen is small due to some reason. first it was upside down.now i got the solution but screen is still small. plz help me to solve this problem

how to solve the upside down display in casio 991ES
plz help....

hi

Turn off the printer and open the printer back door. Use a spot light and give look inside properly. Make sure there no paper. Some time small part of the paper creates the problem. So you can do one thing after open the back door, top side etc make the printer upside down etc. So if anything inside that's will come out. After cleaning again connect it with PC and turn on. Now give a look. If you face same problem then Un-install the printer driver and software from the PC. Then restart the PC and Printer both. Now connect the Printer with PC via USB and install again the driver & software. Then try to print and let me know the result.

Within Windows XP, certain video drivers or graphics card chipsets supporting 180 degree screen rotation can cause the Windows XP display to be presented upside down. This can be (but is not always) tied to lowering the screen resolution in some accessibility programs.

To revert to a right-side up display, hold down the CTRL, ALT and UP (arrow) keys.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Hi, the reason your phone is freezing is more than likely due to the firmware on the phone being corrupt to solve this you need to take it into any small phone shop as these are cheaper and ask them to flash the phone for you and re-install the latest firmware getting this done will solve your problem, how ever you need to back up all your data such as number etc as the phone will be wiped so connect it to your pc if you can or if you cant just ask the phone shop and they should be able to do it for you.

let me know how you get on or if you need further assistance ok

plz rate this solution as i have a whole page of unrated posts, thanks

Holding down CTRL and ALT while pressing the DOWN ARROW flips the screen upside down.
To undo it, and flip it back to normal, hold down CTRL and ALT and press the UP ARROW.


You can also try CTRL-SHIFT and then “r” … this works for some Dell configurations

This problem can also be solve in some PC using the below technique.
In Control Panel>Display>Settings tab>Advanced button, look for settings relating to display or screen position.

Newer video cards have the capability to flip the display 90 and 180 degrees for use with LCD screens that can be rotated.

If the problem still persist, Start you PC with F8 key press, select "Last known good configuration that works"

it will most probably solve the problem.

right click on the display away from the icons and select the video control panel, it may be the nvidia or Ati panel. When the control panel comes up, look down the left pane and there will be a heading for orientation. Click on that and you can change the orientation in 90 degree increments. You will have to click on 180 degrees.

Hi,

To revert back to origina lsetting, just press CTRL+ALT+UP key together.

Hope this solves the problem Thanks.

in the VGA options make rotations to normal

i hoe it will work

mvmanish

Check your graphic card settings. I have a 6600gt, and can invert my screen. Try going: right click your desktop, select properties. Go the settings tab. Clieck advanced. There do you have a tab for your graphics card? Mine shows I have a 6600Gt. After selecting the tab it displays options. I have NVrotate. That rotates my screen.

u need to open the monitor control menu by pressing the menu key on the monitor then select the option showing two bent arrows one facing up and the other down, then adjust.