SOURCE: How Do I maintenance a manitowoc series 150 ice machine
find the filter remove clean with water, coils should be shiney. This should fix the problem
SOURCE: what is the operating pressure
Hi,
That depends...
where in the cycle is it??? the pressures will change during the cycle...
What refrigerant is in it... they used a few different ones over the years...
Is it air or water cooled???
As you can see it is best to get an experience tech to check this out for you... and even then they can be a bugger...
heatman101
SOURCE: have manitowoc ice machine model
CK TROUGH LEVEL SENSOR! THE PROBE OR SOLENOID ARE DEFECTIVE. LEFT BIN LIGHT ON GRN+ PROBE LIGHT OFF RED. TO PROVE WATCH FOR 3 MINS TROUGH WILL OVERFLOW INTO BIN >DRAIN.
SOURCE: my ice machine manitowoc q 132a starts up stops after few seconds while water pump start
There is a high pressure switch that stops the unit running if a fan fails or the condenser is clogged. Next time you start the ice machine, watch the bottom led on the pcb. It will tell you if there is a fault. Meantime, reset the hp switch and clean the condenser thoroughly.
147 views
Usually answered in minutes!
×