Entering setup travelmate 7520 - Acer TravelMate 2300 Notebook

found this online may helpHyundai U.S.A. have provided a free online Workshop Manual for all the Hyundai models that are sold in America.

To use this click :-
http://www.hmaservice.com/authenticator/lo...h%2Fdefault.asp
Register (Internet Explorer required).....log-on; click `Service Information` & enter your car`s details & click the `Shop` tab.

It might be an idea to bookmark this to your favourites........& remember you can print off sections (or the whole manual!) as required.

You need to set the BIOS configuration to boot from the CD.

I'm not sure how the Travelmate enters the BIOS (Setup), it could be the F1, F2, ESC or DEL ket after the ACER logo and before the Windows logo appear on the screen. When the BIOS opens, go to the Config page, set the CD to be the first boot device.

Just place the disc into the dvd rom, power on the computer and follow the prompts.
Usually you'll have to change the boot order under setup. Pay attention to any messages that pop up once you power on the computer, usually press the ESC key during boot up will give you a better idea of what key to push to enter into the setup or to choose which boot device to run first.
Hope this info helps!

hello, and I have a problem with Acer TravelMate 4050 and the problem lies in the total extinction of the system, namely when you turn on Windows light up when you enter and suddenly black screen and do not even think about blocking it immediately, but he remains on but do not think .... that is the problem?waiting for a response or contact id doi_ochii multtumesc advance ....

First of all as you have forgotten the password to reset the password you have to open the notebook and remove the CMOS Battery for a while and then replace it restart the notebook after you restart the notebook all the default setting will be loaded in the cmos setup you can enter the cmos setup and set the password again.

You will need the BIOS password to enter the BIOS setup.
To do a hardware reset remove the CMOS batteries for 30 minutes. Once your BIOS password is removed, you will need to press the <F2> key during POST (Power On Self Test) to enter the Acer BIOS setup.
After you enter BIOS, go to the Boot tab and down to "Security" and make your changes there.
If you need help with the default password, please re-post your request.
Thanks and good luck.

are you sure you don't just have it muted

EBAY. Just enter BB 7520 unlock and watch the results

Yes but you still wont be able to enter your passwords etc Your key board is faulty