Creative SBS 580 driver - Microsoft Windows 7 Home Premium 64BIT Operating System Software OEM DVD

You can check the make/number of that product and contact the manufactures, they sometimes carry stocks.

You can also check in all programs, if it is still not showing up.. you
need to upload it to your computer, make sure all connections are connected right.

Hi
Get into this site and download the driver for your Creative device.
www.siliconindia.com/.../Creative_SBS_380_21_speaker-GGVN29
OK

Hi lorenzogoode
You don't need drivers for these speakers : it's a plug and play system .
Check your connections , power supply and volume settings .
Best regards ,
fanaudi .

standard is green

connect wires properly using converters.after that Properly set in the audio driver(eg:realtek means set 5.1surrounded)

Make sure all of the speaker wiring is seated fully in each connection point on the PC and speaker components themselves. Also, try leaving all of the speakers unplugged for a short while (1-2 hours), reconnect it all, then try again.

If you need further help, reach me via phone at https://www.6ya.com/expert/brandon_bf4b4a06876c89a0

Looks like this is an end of life speaker system..the help you will get through Creative is limited, but here is the direct link to your model #.
http://support.creative.com/Products/ProductDetails.aspx?catID=4&subCatID=792&prodID=14095&prodName=SBS580&subCatName=Multi-ChannelSystems&CatName=Speaker+Systems ( copy and paste into your internet browser address line)

This is the website for Creative Labs support>

http://support.creative.com/

Please vote if this helps you

try to download the necessary drivers and reinstall