SOURCE: Unable to program Universal Remote. provided codes do not work.
Problem solved. I decided to use the learning function of my remote to learn the wanted commands of the original remote. The remote I used was a Sony RM-VL610 which could learn the original remotes functions easy and quickly. This is a very good remote for only $30 purchased at Target. The Macro commands were also entered rather easily. I did not try this method originally,because I thought it would be too time consuming and difficult.
pcwg
SOURCE: Hi I would like to unlock my blueray for region
Hello,
Please get the code here :
www.dvdoverseas.com/dvd.htm
www.regionfreedvd.net/
Regards, Jay__)mlk89
SOURCE: I have samsung BD-D7500/SX 3D
Hello
To change the player to region 9 (region free) follow these steps using the remote control.
1. Ensure that there is no disk in the tray.
2. Switch the player off and then back on. This is necessary to clean-boot the firmware.
3. Wait until the main menu page appears and the player stops doing anything.
4. Press the eject button to open the tray. (The button is between the "Power" and "TV Power" buttons at the top of the controller.)
5. Press the eject button to close the tray.
6. Wait while the player searches for a disk.
7. As soon as the "No Disk" message appears at the top left corner do the following.
8. Press the REPEAT button - just above the TV channel selector at the bottom right of the controller.
9. Enter 7 6 8 8 4 on the number pad.
10. Your region code should appear at the top left corner of the screen.
11. Enter a "9" to make the player region free. (Enter a region code if you want to lock the player to another region for some obscure or perverse reason.)
12. Power down and power up again.
13. Play a foreign disk to verify the change.
Now the tricky bits. This process is timing dependent.
Firstly, you must start entering the code just after the "No Disk" message is shown and before the message disappears. If you jump the gun or miss the boat (isn't English great!) it won't work.
Secondly, the REPEAT key is part of the code. All six keys must be entered smoothly as "REPEAT 7 6 8 8 4". The entry gets timed out so you can't stop in the middle and restart. Don't bash away like crazy, just do it smoothly and briskly.
If you don't see the "your region" the first time, don't worry. Just repeat the process. It may take about a dozen tries before you get it to work.
I can't guarantee that this player does not have a region change counter so I would be a bit careful about changing regions back and forth. I also can't guarantee that this will work with all released firmware. Samsung seems to take this crazy region issue very seriously for some reason.
For people from other parts of the world, all region codes are as follows
1 - 2 9 3 3 4
2 - 5 7 5 3 8
3 - 5 6 7 3 2
4 - 7 6 8 8 4
5 - 5 3 8 1 4
6 - 2 4 4 6 2
SOURCE: Region Free Procedure for Samsung
In this unit the only thing that can be modified is the region for the dvd, not the one for the BR. Follow this
1. Press RETURN (bottom left)
2. Press the access code corresponding to your dvd zone
1 - 2 9 3 3 4
2 - 5 7 5 3 8
3 - 5 6 7 3 2
4 - 7 6 8 8 4
5 - 5 3 8 1 4
6 - 2 4 4 6 2
3. Your current region code will appear top right of screen, Press 9 to
change to region 9 (no region).
105 views
Usually answered in minutes!
×