Hi everyone. Could you please help me out with step-by-step guide how to change dial mode pulse to tone for Norstar M7208? I found how to change standard, automatic and pre-dial mode, but it's not what i need. thank you.
Hello Didi,
Try this site ...
http://btbusiness.custhelp.com/euf/assets/TelephoneSystems/Norstar/HTML/compactmanual/infod.htm
k
SOURCE: Lucent Technologies 925 Phone
If memory serves, to program the touch tone, lift the handset, press [PROGRAM] # # # 3 then hang up.
SOURCE: Tone Pulse
1)Make sure the phone is OFF (not in TALK MODE) 2)Press and hold the PROG buton until you hear a beep. The TALK button will flash while in this mode 3) Presd the TONE (*) button to select Tone Dialing or press the PAUSE (#) button to select Pulse Dialing 4) Press the PROG button again. The unit beeps to confirm.
SOURCE: Hoe to make a Three way call
Make your first call, press hold. Make your second call (internal or external). Press the conference button, then the display will tell you to press the other line (the first one you put on hold).
SOURCE: changing from pulse to tone dial
For the GE electric 2.4 GHZ phone where there is no switch, you have to press the program button and hold until it beeps (talk button will start flashing), then press the tone (star) button and program again. It will beep for confirmation
SOURCE: Need to change phone back to tone dialing
Here's what the manual says: Changing the Dial Mode (Tone or Pulse Dialing) (HS1 only) Your phone can communicate with the telephone network in two different ways: tone dialing or pulse dialing. These days, most phone networks use a method called tone dialing, so your phone comes programmed for tone dialing. If your phone company uses pulse dialing, you need to change your phone's dial mode. If you don't get a dial tone or can't connect to the telephone network, follow the steps below to modify your phone?s settings: With the phone in standby, press and hold [cid/menu]. Press [vol/ / ] to move the pointer to select DIAL. Press [select/channel] to set the phone to pulse dialing. Press [end]. Return the handset to the base. The handset communicates the new setting to the base, and the base activates the setting on any other handsets. Hope this helps out. K
319 views
Usually answered in minutes!
Fafa, i don't have PROGRAM button. Only Feature. It that the same I guess?
×