Toro motors are not available a reasonable price. If you're Toro electric blower is slowing down, throwing sparks, overheating or not starting you may still be able to use your motor by replacing the carbon brushes and or cleaning the commutator. Hope this helps.
Thanks for your responses. I had put new brushes in, and the motor would not turn on. Then I measured the stationary windings and found one of them to be open circuit, so that means a new motor based on my experience, since I didn't see any winding breakage on the accessible surface. If someone has a unit with good windings, but something else wrong, I'll pay the postage.
Check the reset button. The motor may be fine
SOURCE: Toro leaf blower Model 51591 from 2003 has started
Sounds like a piece of wood is caught under/between the impellor and the case/housing. When removing the impellor, you may find it has a left hand threaded nut.
I’m happy to assist further over the phone at https://www.6ya.com/expert/rolandw_c013176d62ee17ae
SOURCE: I bought a Toro ultra electric blower vac (model
Common sense tells me it is not that hard you probably do not need an instruction manual, does life come with a instruction manual O Yeah the Bible. Believe in yourself review the situation, think it over you can do it!!!!!!!!!
SOURCE: Toro Leaf Blower Model 51591 top press-in sleeve
A replacement parts site doesn't even list the motor as being available for this model, just saying what the parts list shows us. They are only showing about 11 parts available for the whole unit:
http://www.partstree.com/parts/?lc=toro_consumer&mn=51591%2C+Super+Blower+Vac%2C+2001+%28SN+210000001-210999999%29&dn=3325_319-_3190002-0001
SOURCE: my toro ultra 51599 stopped
It is very common for the bottom cover to not push in the safety button and render the machine "dead" a simple fix. you can get a new cover through a shop like www.arcolawn.com
cheers
Joe
SOURCE: toro 51591 and torro 51599 will not start
The blower has a cover that snaps on to the tube and covers the propeller. I always use blow mode and it stopped working. I thought the motor was dead but flipped the cover to be in suck mode and it worked. I then put a layer of duck tape around the full circle of the blower side and it snapped in and works fine.
731 views
Usually answered in minutes!
×