PROGRAM AUTO DIAL ON LUCENT 538E - Lucent PARTNER18 Corded Phone

(For Speed Dials on you phone buttons)
1 Press Feature 00
2 Press the butoon to be programmed
3 Dial the speed dial #
Repeat 2 and 3 for additional #s
hope this helps

--- TeleFurb ---

**use with care ** if it is a "Partner System" here you go. if unsure do not do this. it is simple but one wrong keypress will cause ... mmm problems. so just hang up if unsure. dial intercom 777 , then * to get main greeting, if ok then * again then enter extesion should be prompted. press 0 # then password , default is 12345678 #. if it is good dial 9 (administration) then 3 (auto attendant) then 1 , 1, 6, * , # then 1 to record and follow prompts.

press feat 00. touch btn to program dial feat14. this is now a voice mail transfer button. to program an ext button, touch btn to program, press left intercom dial 2 digit extension. Can you dial 777 and get voice mail?

To change the System Time:

1. Press feature +(00)+(left intercom)+(left intercom)+#103 at extension 10 or 11.
2. Enter a new time in 24-hour notation. For example, to set the time to 2:15 p.m., press 1415.
   A display similar to the following appears:
   System Time
   Data 1415
   This time appears on system display phones as 2:15 p.
   
   to program speed dials, press feature + (00)
   press the button you want to program
   dial the number you want programmed, then press feature 00

While the handset is on hook,
1. Press "Program" 2. Press the desired Speed Dial botton 3. Enter your to-be-stored phone number 4. Press "Program" to end the session.

use your phone manual it may help. thats the only way you can get the best solution you need

To program a speed dial for an outside line: Pick up the handset, press #00, press the button to be programmed, press *21, then enter the number to be dialed (including any dial out number and areacode).

To program a speaad dial for in internal extension: Pick up the handset, press #00, press the button to be programmed, press *22, then enter the ext to be dialed.

(Once you hit #00, you can also follow the screen prompts).

Dial into vociemail, ht elady will say "Welcome to ............"

Fill in the blanks.

We need to know that before we can tell you.

I do not fully understand you message but it sounds like you want to get into administrator programming of your voice mail.

I don't deal with voice mail programming. My only suggestion is to try and determine exactly which voice mail model you have and find the "administrator" or "programming" manual for the voice mail.

All manuals are available free at www.avaya.com

Give us more info. What functions do you need? Speed dials Feature 00 Press button to program Enter speed dial number Feature 00