Re: Why does my Seiko only play the intro to a melody?
Mine does the same thing. It plays the intro and starts the melody then goes back to the intro. I've changed batteries. If I move the song selection switch I can get it to work but only for a while.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1) Check the volume knob in the back of the Seiko clock to make sure the volume has not been adjusted all the way down. 2) Make sure the on / off switch is set to on. 3) If it is extremely dark in the room, the clock will not play, it has a light sensor. Make sure the room is well lit. 4) There are separate batteries usually that operate the clock and the music. Change the batteries paying special attention to any acid / corrosion caused by old batteries. Clean out any acid and it should play. Also, be careful not to touch the positive or negative contacts on the new batteries, as this could inhibit proper connection.
If you have done each step above and it is still not operating, your clock is defective. Contact Seiko Service Center directly at: 800-722-4452 extension 3.
If you have had the clock less than a year, and it was purchased from an authorized dealer, it is under warranty, and any repairs will be free. Otherwise, there may be a charge for the repair.
×