95xi ellipitical has a capacitor? - Life Fitness 95xi Elliptical Crosstrainer

About This Video

• This video demonstrates how to remove and replace a Crank Arm Cover on a Life Fitness 95Xi Crosstrainer elliptical

• Philips Screwdriver



• 5/32" Allen Wrench



• 2MM Allen Wrench



• T25 Driver



• T50 Driver

1. Remove the main shrouds as seen in the shroud replacement video



2. Remove the outer link cover as seen in the outer link cover removal video



3. Remove the pedal lever assembly (as seen in Sportsmith's Pedal Lever Replacement video) on the side where the crank arm cover replacement is needed



4. Remove the two bolts holding the crank arm cover in place, and remove the crank arm cover



5. Replace the parts in reverse order

• The video shows the steps involved in replacement of the main shroud on a LifeFitness 95Xi



• Tools:
  
  
  
  
  
  • Phillips Screwdriver
  
  
  
  



• Remove the (4) screws securing the main shroud to the drive frame assembly
  
  
  
  
  
  • There are two screws on each side
  
  
  
  



• Lift straight up on the shroud to remove it



• Install the main shroud in reverse order
  
  
  
  
  
  • Making sure the main shroud fits into the grooves of the lower shroud panels
  
  
  
  

• This video will demonstrate how to replace the Drive Belt on your Life Fitness 95Xi Crosstrainer



• Video can also be used for drive belt replacement on a LifeFitness 90x, 93x, or 95xe crosstrainer

• Philips Screwdriver



• T25 Driver



• T50 Driver



• 2MM Allen Wrench



• 5/32" Allen Wrench

1. Remove the main shrouds as seen in the main shroud removal video



2. Remove the left outer link cover as seen in the Outer Link Cover removal video



3. Remove the left pedal lever assembly as seen in Sportsmith's Pedal Lever replacement video



4. Remove the two bolts holding the crank arm cover in place, and remove the crank arm cover



5. Walk the drive belt off the pulley and remove it from the unit



6. Install the new belt around the crossover shaft first and then walk it onto the pulley



7. Replace the remaining parts in reverse order