Question about Belkin F5D7130 And F5D7010 (Bundle) 802.11g/b (f5d7130/f5d7010)
I have misplaced my setup disk. Lost the password to access the unit.I have reset the unit. I can't access the unit on 192.168.2.1 (as per manual) where can get the setup cd or software? Help please
If I may add to eeagle338‘s posting, it would seem that you need:
1. setup disk
There are no setup files for the Wireless Access Point/Router Belkin F5D7130. However, you need driver/installer/setup files for the Belkin Wireless G Notebook Card F5D7010. These files are OS specific and must match the version of your card.
If you have done the reset & restored to factory defaults then you don’t need a password (leave it blank) to Login, simply press Submit in the Web-based User Interface. If for some reason you cannot login, you may have to do the reset & restore to factory defaults (again)
3. access the unit (I assume the router); I can't access the unit on 192.168.2.1 (as per manual)
You need to be wired to the router from your PC, connect a LAN cable from your PC’s NIC to the RJ45 Ethernet Jack at the rear of the F5D7130. In your PC, assign static (“Use the following…”) IP Address to your PC - 192.168.2.200; Subnet Mask - 255.255.255.0. Open a browser and type “192.168.2.254”, the Web-based User Interface will open. If you have done the reset & restored to factory defaults then as earlier stated, you don’t need a password (leave it blank) to Login, simply press Submit.
5. where can get the setup cd or software?
This site list all the versions of a F5D7010 as well as the appropriate drivers (all are downloadable). And yes they are ".exe" files.
Based on your post “I have reset the unit.”, pls be informed that there are 2 reset methods. Determine which one was performed.
a. Resetting the WAP - Push and release the Reset button. The lights on the WAP will momentarily flash. The Power/Ready light will begin to blink. When the Power/Ready light becomes solid again, the reset is complete.
b. Restoring the Factory Defaults - Press and hold the Reset button for five seconds then release it. The lights on the WAP will momentarily flash. The Power/Ready light will begin to blink. When the Power/Ready light becomes solid again, the restore is complete.
Hope that your concerns were all addressed and that this be of some help/idea. Pls post back how things turned up or should you need additional information.
Good luck and kind regards.
Posted on Nov 05, 2007
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
on Apr 19, 2011 | Computers & Internet
on Jan 27, 2011 | Computers & Internet
Oct 26, 2012 | Dell Inspiron 4150 Notebook
Sep 26, 2011 | Computers & Internet
on Nov 22, 2010 | Computers & Internet
Feb 03, 2011 | Dell Inspiron Mini 10 Notebook
The router can be set to factory default by performing either of these two steps:
NOTE: Pressing the Reset button
on the back of the router for 30 seconds will reset your router to its
factory default settings. All of the settings of the router will then
be erased and the router's IP address will become 192.168.1.1.
Accessing the Router's Web-Based Setup Page
NOTE:To access the router's web-based setup page using Mac, click here.
Open a web browser such as Internet Explorer.
Go to the Address bar and enter your router's IP address ("192.168.1.1" is the default IP of most Linksys routers) then press [Enter].
NOTE : For WRP400, the default IP address would be "192.168.15.1" and if you place the router behind a primary router with the IP address of "192.168.15.1", then the router will automatically assume a new default IP address, "192.168.16.1".
NOTE: If the IP address of the router has been changed, type the router's IP address in the Address bar instead.
The router's IP address can be changed by:
1. Running the router's setup CD.
2. Changing it on the router's web-based setup page.
If you forgot the router's IP address you can:
1. Check the router's IP address. For instructions, click here.
2. Press the Reset button at the back of the router for 30 seconds.
NOTE: This procedure will reset your router to factory defaults. Any settings on the router will be erased. The router's IP address will be "192.168.1.1" and the password will be "admin".
A new window will prompt for a User name and Password. Leave the User name field blank then enter your router's password ("admin" is the default password), then click OK.
If you forgot the router's password you need to reset the router. For instructions, click here.
Aug 21, 2010 | Linksys Wireless-G WRT54G Router
Aug 20, 2010 | Compaq Presario CQ60-220US PC Laptop
Sep 17, 2019 | HP Computers & Internet
661 people viewed this question
Usually answered in minutes!