Haier HD656E Dehumidifier Logo

Related Topics:

A
Anonymous Posted on May 06, 2014

How do I install the drain to my haier dehumidifier?

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Model DM32M Haier Dehumidifier. I am missing a part which diverts the water into the hose drain. All the water now goes directly into the bucket. I want it to drain into the sink nearby.

Did you punch out (or cut) the plug that the hose connects to? If not, its blocking the water from draining to the hose.

Please rate 4 stars if this is helpful. Thanks and good luck!
slide_dehumidifiers-wgxnstrtbjljcxdl1wryefyx-5-2.jpg
2helpful
1answer

Haier dehumidifier will not power on

Turn the ON/OFF Switch to OFF and unplug the unit for 15 minutes.
Once the time has elapsed, plug the unit in and turn the unit ON.

Hopefully, during that 15 minute timeout, the electronics reset and reverted back to the original factory settings. And the unit will turn ON when you press the ON/OFF Switch.

It's also a good idea to check the outlet it's plugged into. It very well could be an issue with the outlet (no power) or the circuit breaker for that outlet has tripped.

If you continue to have a problem getting it started, contact LG Customer Support 1-800-243-0000.
0helpful
1answer

My direct drain connection seems to have quit working. The drainage bucket fills rather than the water exiting the drain hose.

The line may have "gunk" built up in it. I would suggest checking the drain line to make sure it is not blocked.
5helpful
1answer

Haier HDN655E - water does not drain out of hose

check the hose connection,when new these units have a knock-out plug where the hose goes so if your only going to use the bucket and not the hose it wont run out the hose connection
0helpful
2answers

What does an E2 code mean? I have a Haier Dehumidifier that is about a year old, I emtied the bucket and put the bucket back into place and hit the start button and nothing happen I unplugged the unit and...

What does an E2 code mean?

I have a Haier Dehumidifier that is about a year old, I emtied the bucket and put the bucket back into place and hit the start button and nothing happen I unplugged the unit and error code E2 keeps comming on


0helpful
1answer

I have a model HD-306 Haier dehumidifier which is hooked up with a hose to a drain. It has been working fine until several days ago. Water now is coming from the bottom of the unit onto the floor. I...

please make sure the unit is leveled.also make sure the hole in the drain pan not clogged.also the size of the hose must be fit the hole not smaller
0helpful
1answer

Haier 30 pint dehumidifier continuous drain problem.

Many just attach the hose at the reservoir; from your description, Haier apparently has a separate location. Check that the point that the hose attaches has an opening (many don't, they expect you to drill it). It should then drain through gravity. Check to make sure that no part of the drain hose is higher than the bottom of the reservoir, otherwise it can't drain. It won't siphon because each time the the tank empties, the suction is broken and the siphoning can't continue.
Not finding what you are looking for?

85 views

Ask a Question

Usually answered in minutes!

Top Haier Dehumidifiers Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Haier Dehumidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...