5200 printer error

Canon Printer Error 5200 may occur if the ink level in your printer is low or if you have a defective ink cartridge. Follow the steps to fix Canon printer 5200 Error code:

·Refill your cartridges/Ink tank
·Clean printer cartridge
·Factory reset printer

Find here the more canon printer error codes and their solutions.

I did recently install a new ink cartilage and now it won't work. I have a small PC and put it on a larger font so I could read it. I am not able to copy downloads due to this change. I was printing after the cartilage was installed but after the font modification, I attempted to print a download by pressing enter, and now I don't see my lexmark icon on the top of my computer screen.I could not get the whole printing page on my Aspire One so I pressed enter.

Error 5200 indicates that the print head temperature has exceeded the specified value. Turn off the printer and then turn on, if error still persist replace ink cartridge or print head.

Canon printer error code 5200 is a technological malfunction that stops printing of a canon printer. The error is registered on the screen when the temperature of the ink cartridge is high. There are no concentrations of ink present on the ink cartridges. The print head of the printer is also heated by a temperature rise resulting in an error code of 5200. Canon Printer Error 5200 Few troubleshooting steps are explained below. These troubleshooting steps are so basic that they can be performed by anybody with enough guidance. But if, in any case, someone is unable to comprehend these troubleshooting acts, assistance from trained experts is needed.

Canon printer error code 5200 is largely due to cartridge problems. This can be due to a low amount of ink in your cartridge, a faulty cartridge, or maybe there are some flaws with the logic board of your printer. We realize that Canon printers are designed to be printed in black, even if the Black cartridge is empty, using colors in the ink cartridge. Thus, if you see a mistake of 5200 in the Canon printer, the printer cartridges are either empty or near to empty. Now that you know the root of the error, let's talk about the solutions.

Our Services: You may find that the Canon printer error code 5200 has been deleted after the above information has been completed. But if you still get the same error code on your computer screen when printing, you can contact Our Printer Error Specialist now.

Check given blog.

If you refilled the cartridges with a refilling kit then this error will continue. You see, cartridges have a chip installed on them and it is programed to calculate approximate ink remaining after a certain number of pages are printed.

For eg, a chip on a new cartridge is programed that a full page takes say .5 ml, then if you print 1 full page or two half pages, it will deduct .5ml from the ink volume. When it reaches zero, it does not know how much ink is in there; it never knew in the first place. Now if you refill it up, the chip just thinks that all the pages have been printed so the cartridge must be zero.

In short, this error will stay, if you are able to print ignore the warning and continue to print until the print quality degrades. If you are unable to print you might have to install a new cartridge. OR if you're luck, you may find a chip reseter on the internet or from the refill service.

You should take it back and exchange it or read on below.
Most modern cartridges have an ink level chip built on to them.
Should the level drop below 25% then most of these chips lock up and will not reset.
Re-filling them will have no effect
If you are lucky you should be able to find either a chip resetter around on the internet or maybe even local
OR
Even better empty cartridges that never need to be reset.
The second option is my preference
I realise these are not for your specific printer but there are others listed on both those sites as well

Error 5200 is a printhead temperature error, sounds like you need a new printhead. The part number is printed on the side of the printhead. it's a QY6 number

TYPE IN ON ADDRESS BAR OR MENU
CANON PIXMA IP1600 PRINT ERROR 5200
ENTER

ROD

may be the driver are not installed correctly ... just try reinstalling the drivers ... and make a check that you have inserted the ink cartilage or not ...
if not insert it and then give try ... it may work ..

if problem persists then call the service rep ...