How do i adjust the valves on the intek v-twin 23 hp motor on my yth2348 mower

SOURCE: I NEED BELT DIAGRAM FOR MY HUSQVARNA RIDING MOWER

http://www.usa.husqvarna.com/home.aspx try this out for your answers, I hope this helps you. MERRY CHRISTMAS!

panilling9

• 284 Answers
• Posted on Jun 14, 2009

SOURCE: what kind of oil for a husqvarna riding mower?

Yes Briggs and Stratton recommends sae 30 in most all their engines even overhead valve (OHV)
Kohler uses 10w-30 in most of their overhead valve engines

Briggs has their own bottled oil with their label and additives and can find at lowes
Kohler the same

SOURCE: I replaced the blades on

Not the float.
Where you mowing when you had the problem or were you just driving the mower? If you were mowing, then disengage blades and see if it returns to full driving power. If you were just driving, then with it sitting, engage the blades and see if problem recurs. The blades are the bigger load on the engine, your mower will drive around with a little 4HP engine, all the extra power is for the blades and if pulling anything.
Let me know what the test results were, so we can figure out if it is in the carburetor or not.

SOURCE: I have a model yth2348

hydrostatic transmission there is only one throttle setting and that is WFO. if it is running slower than it used to, and the drive belt is snug, then you are looking at a failing transmission.