I have Htc P3400i hanset. Can you please provide me the manual settings for GPRS/MMS for idea prepaid connection. I am from jaipur vipin

you can get the mms/gprs settings from the SERVICE PROVIDER only so contact AIRTEL for the settings

who s ur service provider?also country!

bsnl gprs settings are different zonewise, you should have mentioned your zone.. else, try consulting http://www.bsnl.co.in/service/mobile_gprswap.htm for your zone..

hello you call your service provider for gprs setting and than your problem was gone

SETTINGS FOR BPL WAP ON HTC P3400
SETTINGS FOR BPL WAP ON HTC P3400I
START>>SETTINGS>>under CONNECTONS tab>>CONNECTIONS>>UNDER ADVANCED tab>>SELECT NETWORK>>select MY ISP there>>then NEW>>
"enter name for these settings:BPLWAP if this exist den BPLWAP2
under MODEM tab create NEW
"enter name for connection:BPLWAP
"selest modem:CELLULAR LINE(GPRS)
tap next
"access pont name:MIZONE
tap next
USERNAME:ur 10 digit mobile no.
PASSWORD:bplmmsc
tap finish
under PROXY SETTINGS tab
mark all two boxes
enter proxy server as "10.0.0.10"
den tap ADVANCED
tap on HTTP
server:10.0.0.10
port:9401
username:ur 10 digit mobile no.
password:bplmmsc
click on ok again ok nd again ok
now below screen will appear saying
programs that automatically connect to the internet shud connect using:select BPLWAP or BPLWAP2
thats it ur done woth settngs
now go tasks der it will show BPLWAP
select MANAGE EXISTING CONNECTIONS
tap and hold on BPLWAP and choose connect

Hi,

Thank you for choosing Fixya.com

Please follow the instruction below very carefully and make sure that you have load of your sim enjoy.

For Globe Subscribers:

For a complete listing of compatible MMS & GPRS phone handsets — send NOKIA, ERICSSON or SAMSUNG (your handset model) to 2365.
To get your phone’s settings, text GO (handset model) to 2951. Example, GO N3650. (For a list of compatible handsets, refer to #1)

Note: For Nokia 6220, 6600, and 6820, text GO < handset model >,1234 and send to 2951. Make sure to type in the two commas before the 1234 PIN. Regular text messaging charges will apply.
Enter 1234 when asked for PIN to save settings.
Send an MMS message for only Php 5.00 to activate the service.

Note: For prepaid subscribers, please make sure you have credits first before trying to access GPRS/MMS. You won’t be able to use the service if you have zero balance.


For Smart Subscribers:

OTA (over-the air) configuration

a) To activate GPRS *and* MMS
- SET MMS send to 211
- wait for the configuration to be downloaded to your phone (up to 24 hours)
- once downloaded, you will have SmartMMS data account, and SmartMMS WAP profile, and your MMS is configured already to use SmartMMS WAP profile
- you will also receive a confirmation message that your GPRS and MMS have been activated
b) To configure internet access (full access)
- SET INTERNET (handset model) send to 211
- wait for the configuration to be download to your phone, in minutes
- once downloaded, you will have SmartPC data account, and SmartPC WAP Profile
- edit this account to include DNS settings. DNS IP addresses are -202.057.096.003, 202. 057.096.004. you only need one.
c) To configure WAP via GPRS
- SET GPRS T68 send to 211
- wait for the configuration to be download to your phone, in minutes
- once downloaded, you will have SmartGPRS data account, and SmartGPRS WAP Profile. SET THIS AS YOUR DEFAULT PROFILE
d) To configure WAP via CSD (Optional - kasi MAY BAYAD ITO, per minute)
- SET WAP T68 send to 211
- wait for the configuration to be download to your phone, in minutes
- once downloaded, you will have SmartWAP data account, and SmartWAP WAP Profile. SET THIS AS YOUR DEFAULT PROFILE

I suggest you clear all your existing data accounts and wap profile beforeyou do this. If you follow the instructions in this order, SmartPC will have a CID=2. Your dial-up number willbe *99***2#

or to simplify it:

Setting up of MMS and GPRS handsets:

To download SMART MMS phone settings, key in SET MMS and send to 211.
To download SMART GPRS phone settings, key in SET GPRS and send to 211.

Activating SMART MMS and GPRS:
To activate SMART GPRS, key in GPRS ON and send to 333.
To activate SMART MMS, key in MMS ON and send to 333

Upon receiving the configuration settings, select "Save All" to save the settings in the phone.

Activation of MMS and GPRS will require a confirmation message from SMART. A message will be sent to the sub once the feature has been activated.



For SUN USERS:
Sun MMS

On the home screen, press the Programs soft key, press More to move to the next page.
Press Accessories then select MMS Setup by pressing the Action button.
Provide the following data on the required field, press Ok when done.

q First field: MMS connection
q IP: 202.138.159.78
q Port: 9201
q MMSC Address:

q Message Expiry: 1 day
q MMS Download: Auto

On the home screen, press the Programs soft key, press More to move to the next page.
Press Settings, select Data Connection.
Press the Menu soft key then select Edit Connection by pressing the Action button
Select GPRS Connection. Press Menu then select Add by pressing the Action button

Provide the following data on the required field:

q Description: Sun MMS connection
q Connects to: MMS Connection
q Access point: mms

When finished, press Done four times.

Sun GPRS

On the home screen, press the Programs soft key, press More to move to the next page.
Press Settings, select Data Connection
Press the Menu soft key then select Edit Connection by pressing the Action button.
Select GPRS Connection. Press Menu then select Add by pressing the Action button.

Provide the following data on the required field:

q Description: Sun GPRS
q Connects to: The Internet
q Access point: minternet

Press Done three times. On the Data connection, select Sun GPRS under Internet connection.
When finished, press Done.

Sun WAP GPRS

On the home screen, press the Programs soft key, press More to move to the next page.
Press Settings, select Data Connection.
Press the Menu soft key then select Edit Connection by pressing the Action button.
Select GPRS Connection. Press Menu then select Add by pressing the Action button.

Provide the following data on the required field:

q Description: Sun WAP GPRS
q Connects to: The Internet
q Access point: mms

Press Done three times. On the Data connection, select Sun WAP GPRS under WAP connection.
When finished, press Done.

Sun WAP Proxy

Crate a proxy connection

Description: Sun WAP Proxy
Connects from: The internet
Connects to: WAP network
Proxy (name/Port): 193.113.200.195
Type: WAP

To Activate GPRS:
Create a text message, type "ACTIVATE" then send to 2300


please don't forget to rate our answers properly.

vodafone live setting for windows based mobiles version 6::::

select "start" ---->>> select "settings" ------->> select "connection"----->>> select "connections"

Now Select "Add a new modem connection"

Connection name::"Give any name"
Moden:: select "Cellular line (gprs)"
Select "Next"
Access point name:: "portalnmms"
select "Next"
Username:: (blank)
Password:: (blank)
Domain:: (blank)
Select "Finish"

Now Select "Setup/Edit my proxy server" below that "Add a new modem connection"

Select the two check boxes
1.) This network connects to the internet
2.) This network uses a proxy server to connect to the internet

Now you ll have proxy server box below that you will have "advanced"
Select "advanced"
Select "HTTP" --->> Server:: "10.10.1.100" port:: "9401" select "ok"
Select "Wap" ---->> Server:: "10.10.1.100" port:: "9201" select "ok"
Give ok to all options.

Now select "start" select "internet explorer" and try it for the connection...
When internet is connecting it ll show "Connecting to GPRS"
You ll be getting "locating" and "opening" and the webpage

Try this :
Go to your phone MENU -> CONNECTIVITY-> BSNL GPRS

or

MENU -> CONNECTIVITY-> BNSL PREPAID SERVICES ->GPRS SETTINGS.

GPRS and MMS SETTINGS will be send to your phone shortly, along with the instructions on how to install. Goodluck......a rate from you for this solution will be much appreciated. Thank you!

Hopefully you mean the south of the USA if so here you go

GPRS Web Session:
Homepage: http://172.23.1.135:8080/cellularone.wml
Service Type 1: WAP
Gatewap IP 1: 172.23.1.252
Port 1: 9201
Service Type 2: WAP
Gateway IP 2: 172.23.1.252
Port 2: 9201
Timeout: 15 minutes
GPRS APN: cellular1wap

MMS Web Session:
Homepage: http://www.openmobilealliance.org/
Service Type 1: WAP
Gateway IP 1: 172.23.1.252
Port 1: 9201
Service Type 2: WAP
Gateway IP 2: 172.23.1.252
Port 2: 9201
Timeout: 15 minutes
GPRS APN: cellular1wap

After browsing a lot of sites and experimenting with the settings finally I was able to configure my HTC P3400i with Vodafone Live support without any help from the Vodafone customer care (who were very bad and rude when I called them for getting the setting). The settings is working fine for me in Bangalore. Hope this helps all who bought this phone and struggling for getting the GPRS setting for HTC P3400i.

Below is the step by step instruction:
Step 1
Start->Settings->Connections->Tasks->Add a new modem connection:

Enter a name for the connection:
<give any name>

Select a modem:
Cellular Line(GPRS)

click next

Acess point name:
portalnmms

User name: <blank>
Password: <blank>
Domain:* <blank>

Go to Advanced->TCP/IP
select radio button "Use server-assigned IP address"

Go to Advanced->Servers
select radio buttion "Use server-assigned address"


Step 2
Start->Settings->Connections->Tasks->add proxy setting

Select "This network connects to the Internet"
Select "This network uses a proxy server to connect to the Internet"

Click "Advanced" button
Tap on HTTP
Server: 10.10.1.100 Port:9401

Username: <blank>
Password: <blank>
Domain: <blank>

Tap on WAP
Server: 10.10.1.100 Port:9401

Username: <blank>
Password: <blank>
Domain: <blank>

Step3:
Start->Settings->Connections->Advanced
In "Select which networks are automatically used"-> click the Select Networks
Programs that automatically connect to the Internet should connect using:
Select the Connection name which you configured in Step 1

Programs that automatically connect to a private network should connect using:
Select the Connection name which you configured in Step 1

Make sure you reboot after doing above change.