I am not able to find my manual. I am hoping that

What is make of the remote starter? Look on the Internet for the instructions

Hi Alphonse,

To get the best advice and info, Try This: join yahoo group SPECIFIC to your radio Make/Model, I'm sure there is such a group active, so give them a go.

You'll get the advice you require and you can download manuals, diagrams and other goodies as well.

I hope this helps you.

Regards,
Peter

Most of the Cobra product models are here: https://www.cobra.com/pages/manuals.cfm . Scroll down to the MicroTalk Two-way radios/ . The direct link to the manual for the CXT90 is https://www.cobra.com/downloads/manuals/CXT90_MANL.pdf .

I hope this helps.

Cindy Wells

If you want to open your gprs there is 2way to open it 1st click your simcard then click to gprs on or internet then they will send you a configuration then all you have to do is to save it and its done. 2nd option call your network operator then talk about your manual internet configuration then all you have to do is write down the setting ,, hope it will help you alot

Hi there's this website something
like reliable-store and it is very amazing for manual for repairing servicing anything
someone on fixya recommended it to me and I thank him even today
They have full manuals free

Valet mode on remote starts is there so that when you have someone working on your vehicle the start button for your remote start won't work. Say you're getting an oil change and for some reason the button is pressed, the vehicle wont start with the technician under it and no oil in the engine. In your owners manual it will tell you how to turn Valet mode on and also how to turn it off.

here is a link for the installation manual. hope this helps, dave.
http://www.autopageusa.com/resources/RF420%20INSTALL%20manual.pdf

Make sure that the responder is set for your car. this responder can work for multiple cars...The owners manual tells you how to check.

The GP-63 and the GP-68 uses the same users manual. You can download the user manual which also has programming and cloning information in it from:
http://www.batlabs.com/2way.html and choose GP-63......Good luck

http://safemanuals.com/ see if this helps if so let me know by rateing me.