Not recognised on new computer - SanDisk Sansa m240 MP3 Player

You cannot see your new 500 on the PC,
my drive connect is a net server and this is how you purchase updates from now on.

Hi, its not the cable!
It needs the drivers for the printer to be installed, go to http://software.canon-europe.com/ and download (&install) the drivers for the MP150 for your operating system.

Disconnect the unit from your computer, then reconnect it and it should recognise your sat-nav

kindly check that ur comp is fully loded and the usb driver is properly installed

Look under device manager ,under the tab for disk management look for the disk there If you see it there, you will need to initialize it.
Good luck

use it on a differnet usb port
these portable hard drives have some issues with 1.1 usb ports

If its a new computer, but with the same software, don't you think it would be the computer's problem???

They have a good return policy on them. They should be able to get you a new one right away.

Uninstall all of the Nokia-related software on the affected computer, reinstall it, and THEN plug it back into your computer.

** Problem Solved **

I found it wasn't the camera entirely to blame. I tried another USB cable on another pc, and although the camera was doing the same thing as my problem, the computer recognised the camera as new hardware, and asked me how to access the pictures. So I was able to get the pictures from the camera to the computer, and then saved them on to my Kingston flash drive. So taking the flash drive to my daily PC, I plugged in my flash drive via a USB extension lead, and discovered that would read either... alarm bells rang. So I unplugged the lead, and put the flash drive straight into the computer direct. The computer recognised it immediately. So plugging in the extension lead again, and the flash drive, it read this now. So I tried the camera, and it recognised it.

So I don't know exactly what the problem was, but it was solved... saved me a lot of running around and money ;)