How do i fix my printer absober problem - Canon Pixma iP4500 InkJet Printer

Open the printer carefuly remove the ink absober located under the head cleaning mechanism, wash it with water and liquid soap, dry it and re use againg. If you have new absober just replace.

Resetting the waste ink absorber on a Canon printer can resolve some error codes that appear when turning it on.

1. Make sure the printer is turned off.
2. Press and hold the Resume button (triangle inside a circle).
3. Whilst it is held down, hold down the Power button. ...
4. Keep the Power button held down. ...
5. Release the Power button.

More items...

Reset Canon Printer ink absorber ' Fix-KB

www.fixkb.com/2011/06/reset-canon-printer-ink-absorber.html canon ip7240 is saying ink absober full how can reset it Google Search
see if this helps you out.

type in google your printer model and the error code or "ink absorber full" and check the solutions.
You also may search in these blogs:
http://resetcanon.com/

http://fix-your-printer.blogspot.com/

ink absober full

Need to reset waste ink absober full.
Follow this step to reset waste ink absober full.

1> download iptool to reset waste ink absober full
Download here ----> Service tool 1
Service tool 2
After ypur download finish
> turn off your printer power switch
> open your printer cartridge door
> press and hold on/off button (never release)
> turn on printer power switch
> push your printer cartridge door switch with pen or anything can press door swith.
> then release on/off button
> close open door
> then press on/off button 1 more
now your printer is in normal mode( no orange led blinking)
Then you can use ip service tool to permanent reset waste ink absober full.

Hope this guide can help fix your problems

Extra download
Fixwasteinkabsoberflowip1000

Need to reset waste ink absober full.
Follow this step to reset waste ink absober full.

1> download iptool to reset waste ink absober full
Download here ----> Service tool 1
Service tool 2
After ypur download finish
> turn off your printer power switch
> open your printer cartridge door
> press and hold on/off button (never release)
> turn on printer power switch
> push your printer cartridge door switch with pen or anything can press door swith.
> then release on/off button
> close open door
> then press on/off button 1 more
now your printer is in normal mode( no orange led blinking)
Then you can use ip service tool to permanent reset waste ink absober full.

Extra download
Fixwasteinkoverflowip1000

This problem is between waste ink absober full and ink cartridge.
Firstly your need to reset waste ink absober full.
Follow this step to reset waste ink absober full.

1> download iptool to reset waste ink absober full
Download here ----> Service tool 1
Service tool 2

After ypur download finish
> turn off your printer power switch
> open your printer cartridge door
> press and hold on/off button (never release)
> turn on printer power switch
> push your printer cartridge door switch with pen or anything can press that door swith.
> then release on/off button
> close open door
> then press on/off button 1 more
now your printer is in normal mode( no orange led blinking)
Then you can use ip service tool to permanent reset waste ink absober full.
----------------------------------------------------------------------------
IF after reset your waste ink absober full, problems still apppear error5100
> change your ink cartridge with the working cartridge

usually error e5100 due tow problems above

Hope this guide can help fix your problems

Extra download
Fixwasteinkabsoberflow

you need to replace the absorber waste ink pad and service the printer

You really need a service center for that, some have posted methods to reset here, but when the ink overflows it ruins the printer, and anything it leaks on.Canon customer service can tell you the nearest center. 1-800-828-4040.

how do i clean the ink waste absorber of canon pixma ip2000 printer