Fisher & Paykel GW612 Top Loading Washing Machine stops when spin cycle reached. Fault code 00X00X0X x= light on.No flashing lights
Hi there
That fault is the pump blocked error (no change in water level).
i have a quick and easy way to solve this problem.
first turn the machine off then tilt the machine back and lean it on something(a chair or wall), look underneath, in the top right hand corner of the plastic outer boul you will see a small pump motor it has a fan on it spin this fan and if it is hard to turn that means there is somthing stuck in the drain pump keep turning the fan and try to free whatever is stuck in the pump, then try the machine on spin again all goin well the object in the pump should come out with the drain water(doing this will not harm the machine) if the object is still stuck you will need to get the water out of the machine (bailing or siphioning will work) and tilt the machine back again and take the wires off the pump and there should be a white tab on the boul holding the pump on pull this tab and twist the pump anticlockwise about a quarter turn(you will need a few towels or a boul or bucket to catch the water) and it should come off exposing the blockage.
Hope this solves your Problem.
Nick
This is a fault code 37,And indicates either a blocked or faulty pump,Suggest changing pump,Lean the machine forward (after bailing out water),And by lifting the little plastic lug on the pump mounting,And turn the pump anti-clockwiseto remove it.Hope this helps Cheers.
Can't, off-hand, remember that specific fault code. Possibly a rotor position sensor in which case you will need a Tech. Call F/P
2,178 views
Usually answered in minutes!
From others post have already had the machine ready to work on and moving fan removed the obstruction - Thanks
fisher and paykel IW9-12 top loader code 9
Some of the lights on the control panel keep flashing. How do I reset it back to factory settings.
flood
×