Tata photon connection error - Microsoft Windows Vista Ultimate Edition

Hi,

Was it working earlier?

If yes then, Either you balance on your data card is over or some issues in Tata servers/Link

If no, Then remove the Tata photon dialer from Control Panel>> Programs & Features and then reinstall it..

Also check if your Firewall is blocking the connection establishing attempt.

Thanks,

Try here for a user manual: http://www.tataphoton.com/tata-photon-plus-manual.aspx

Re install tata photon plus and then try again. First remove from the control panel and run setup wizard from your dongle. If it still not connects your modem to an internet then the problem is from your service provider then call him. He will connect your modem. I am knowing this fact because I have also tata photon whiz connection. Thanks for using FixYa.

hi Lokendra,
Can you please email the firmware v 1.07 to me? the tata photon model that I am using is EC156.
Many thanks for supporting. My Email id is [email protected]

sir ,
i use the tata photon plus but when i cnnecting it shows error 734 the protocol link was termineted

this means you are not connected to the internet, are you using prepaid or postpaid for your tata photon? You could have reached your allowance for the month.

If you have an expansion modem or LAN disconnect those devices then try again to turn on the computer.

Please connect the TATA Photon + to the USB port of the computer and then install the TATA Photon + Software which is bundled with the device. Try to connect for the Internet.

Please contact customercare tata photon


Please let me know this is helpful

Dear frnd

kindly download the epivalley modem software for windows 7 and revert

http://www.tataphoton.com/download/dialers/Windows7_dialer_for_SEC8089.zip