Belkin (F5D7231-4) Wireless Router Logo

Related Topics:

A
Anonymous Posted on Apr 30, 2014

Power light keeps blinking belkin - Belkin (F5D7231-4) Wireless Router

2 Related Answers

Anonymous

  • 427 Answers
  • Posted on May 20, 2008

SOURCE: My Belkin is blinking.

IT means that the router has gone defective.

Ad

Anonymous

  • 32281 Answers
  • Posted on Apr 25, 2011

SOURCE: My Belkin "Wireless" light keep

Try resetting the Belkin back to the default condition.
To reset the Belkin back to the default settings -
Press and hold the pinhole RESET button at the back of the router and thenpower for at least 15 secs. Then release the RESET button.
Connect a LAN cable from Belkin to your laptop/computer's LAN port, open abrowser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

My modem light is orange. every time i reset it it goes from blue to orange

Hi Christopher s crisp,
Is it blinking Orange or steady?
Blinking amber: The Router can't detect the modem. Either the
modem is off, is not plugged into the Router, or is unresponsive.
It could be the modem.
You can try connecting the modem directly to computer bypassing the router and see if that works.
Check the LED on Modem.
Do you have other computers to test the connection?
Might need to talk to ISP if issue with Modem.

Let me know.
Thanks
0helpful
1answer

Router keeps dropping internet. the internet light blinks and i have to power down the router then it works again

belkin routers are known for this, i have the same one and had the same problem, you need to go to the belkin website and update the firmware!!!

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/charles_c2f37a3461344482

3helpful
3answers

Modem router light blinking (no wireless connection) F5D8631-4

Try restoring the Belkin back to the factory default by powering up the Belkin and pressing the RESET button on the back of the Belkin for 7 secs. Then connect a LAN cable from the computer to the Belkin, open IE browser and type the configuration IP address and configure the wireless settings ie. SSID, encryption etc. The computer wireless cards will need to be configured with the Belkin wireless settings to allow them to communicate with the Belkin.
3helpful
2answers

Belkin F5D8236-4 Wireless Router will not connect to pannaway dsl modem with same settings as router I am replacing. Dynamic IP address setup. Modem light continously blinks orange. No internet light.

1) With direct connect with modem, check the IP address and default gateway.
(I came across such a modem, it gave default gateway as 192.168.1.254)
I also had the doubt of configuring as a dynamic connection
But it won't work!
Contact your ISP to completely bridge the modem and configure the dsl modem as PPPoE connection with correct username and password.
Finally connect the modem to router and do a complete network power cycle, i.e.: Unplug power from router 1st, then power from modem, unplug the telephone line and now do the exact reverse process... Plug back the tel. cable, then power to modem... now WAIT for lights on modem to come back, then plug in the power to router. This will surely work.
0helpful
1answer

Cant get the BELKIN to work

From the manual:
Resetting the Router
Push and release the “Reset” button. The lights on the
Router will momentarily flash. The Power/Ready light will
begin to blink. When the Power/Ready light becomes solid
again, the reset is complete.
b. Restoring the Factory Defaults
Press and hold the “Reset” button for at least 10 seconds,
then release it. The lights on the Router will momentarily
flash. The Power/Ready light will begin to blink. When the
Power/Ready light becomes solid again, the restore
is complete.
0helpful
1answer

Restart problem

eu não esto consegundo estala no meu pc pressizo de alsilio por favor
0helpful
1answer

My Belkin is blinking.

IT means that the router has gone defective.
1helpful
1answer

I have a belkin wireless g router. Internet light keeps on blinking though I can surf the internet. Is this normal or should I have a solid light on the internet?

This is normal - indicates internet traffic. Don't worry about it so long as all the lights are green. The lights will turn orange if there is a fault of any kind.

Hope that helps!
Not finding what you are looking for?

86 views

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

ExpressFiX
ExpressFiX

Level 2 Expert

691 Answers

Brad Brown

Level 3 Expert

19187 Answers

Alexander

Level 2 Expert

171 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...