What does code c6230 mean? - Copystar CS-3500i Copier, Printer"

What does the trouble code 70 h95 mean - Fixya

www.fixya.com/support/t25932829-trouble_code_70_h95_mean

28 mins ago - what does the trouble code 70 h95 mean - Bowflex Treadmills question.

What Does Your Treadmill's Error Code Mean? - LifeSpan

www.lifespanfitness.com/.../what-does-your-treadmills-error-code-mean

Free
May 21, 2015 - Please refer to the following table if your LifeSpan treadmill is displaying an error code. If after trying the suggested solutions your treadmill is .

first,IT IS NOT A CELL PHONE!!
http://h10032.www1.hp.com/ctg/Manual/c01150745

http://h10032.www1.hp.com/ctg/Manual/c01147652

http://h10032.www1.hp.com/ctg/Manual/c01147544

If the machine is just using magenta, yellow and cyan to make black then you get brown, not black, (that why you have a black image unit, because YMC will not make black, color system issue. unless the machine is using yellow,magenta, cyan, then black. Are you using 3rd party toner or OEM cartridges? Did you replace the cartridge before it was required?

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Philips universal remote or logitech harmony remote

okay, 1998 voyager these are not obd2 codes, these are genric codes, you used ignition to get these .
these codes are for older models that use codes like these 12 35.
the newwer obd 2 use codes like po 013. i will try to see what i can find, also the engine size is important.

okay here we go, the first code is 12, this code means the battery was dead or dissconnected.
the next code 35. this code means loss of prime, code # 11
means internal transmission failure.
the code 55 means gear ratio error.

these codes would tell me that you have transmission problems. this may mean internal trans failure and a rebuild or replacement transmission is needed or shift pack needs replacing. anyhow i would have a shop check this out, these van are known for transmission problems. hope this is helpful good day

if it's asking for a PUK code, you have to speak to your operator

P0700 means transmission control fault detected,either it is mechanical or electrical.This code is a generic code,you will need a enhanced code that mean a manufacture scantool or a scan tool that can read enhance code.

Yes please this is exactly my problem if anyone can help me with this i will sure be grateful please answer it

If the Nokia 7210 says Code error means you entered the wrong code,It's Network Unlock code or security Unlock code?Network unlock code means you can have only 5 Unlocking tries ,if you missed means it get hard locked ,so cannot unlock using the unlock code,get the correct Unlock code from the site
Unlock-free.com/nokia/nokia-7210.html and Unlock from Network lock,You need to unlock from security or password lock means get the master reset code for Nokia 7210 at here and reset it.You can also try default code 12345 or 1234 or 0000 if not works means get the master reset code and reset it.

It's asking for NP Code means Network provider code,that means Unlock code,If the Mobile locked to other Network means you trying to insert other Network Sim means it asks for Unlock code or NP Code,Unfreeze Code,subsidy code,Special code,NCK code,MEP Code etc...It depends upon the Brand of Mobile..so specify the Mobile Brand ,model,network,country it locked now,IMEI number and get the Unlock code at
Unlocking4u.com and Unlock it...