Receiver 510 error code 836 - DISH Network DVR 510 DTV Receiver / 100-Hours Video Recorder

PLEASE INFORM ME
MY XEROX 510 IS DESPLAY ERRORE CODE LL-12

Here is the operator's manual that has error code listings:

http://download.support.xerox.com/pub/docs/xes_510copy/userdocs/any-os/en/510dpopmana_eng.pdf

Hi, Cheri Torres with DISH Network Customer Service here. I came across your post and wanted to see if I could help. In order to help you I would need a little more information on the issue. On your local channels are you seeing an error message or are the local channels skipped over completely? There are a few different basic trouble shooting steps that you can try in order to fix this issue. The first step to try is a reset, you can do this by unplugging the receiver from the wall outlet for 10 seconds. If this does not resolve your issue you are going to want to try checking the guide to make sure the list is not on ALL HD or on a personal list. The next step to try is running a check switch test which will also check the signal you are acquiring. You can do this by pressing menu 6-1-1, then select check switch then test. Once you have allowed the test to run you may see an 836 error message, if you do select cancel, do not save. If none of these options work or you do receive the 836 error message we may have to do further trouble shooting and send out a tech to your home. Please email me directly at [email protected] and I would be happy to help you further. Thanks

Guest,

The receiver may be developing a hard drive problem. Have you seen any error messages pop up on the TV screen (024 or 311)? The receiver may need to be replaced. You can call 1-800-333-3474. I hope this helps.

Ray Calo
DISH Network - Executive Offices

Make sure that the software is correct. Should be P4.07
you can go into the DVR and replace the hard drive but I would suggest getting Dish Home Plan, Replace the receiver and then cancel the Home Plan. Talk to Dish Network and they will work with you.
for tech support go to: tech.dishnetwork.com

It may be that your dish has been blown out of alignment or struck by something resulting in the misalignment. The dish will need to be repointed. Please call Dish for a service call to rectify the issue. Thanks for using Fix Ya.

http://www.retrevo.com/support/Sharp-UX-510-Fax-Machines-manual/id/310bh142/t/2/
click this link for full instructions

You already asked this one:
http://www.fixya.com/support/t1273415-need_product_code_tomtom_go_510_gprs

error 12 is what you get if you autocalibrate and do not have the microphone attached.