Dewalt DPD3100 Gas Pressure Washer Logo

Related Topics:

A
Anonymous Posted on Apr 27, 2014

Is there an alternate part for A01971 on Dewalt DPD3100?

3 Related Answers

Neciforo Llanto

  • 942 Answers
  • Posted on Jul 05, 2009

SOURCE: My DeWalt Gas Pressure Washer Model DPD3100 is

Hi

Just try the following steps

  • Inspect the water supply connections
  • Inspect the drain hose
  • Inspect the water pump
  • Inspect outer tub for cracks or corrosion
  • Inspect the tub seal
  • Inspect the tub bearing
Good luck

Regards

PCmania

Ad

JOHN LAPIER

  • 2602 Answers
  • Posted on Nov 24, 2010

SOURCE: How do you check oil in pump on Dewalt DPD3100

There is a little window on the side of the pump to see the oil level but thats normaly the problem None of these companys make there owen pumps or engines i owen serveral power washers if you can tell me more about the problem Iwill likely know how to fix it see who made the pump and the engine and let me know pier_j

Tim Venetis

  • 260 Answers
  • Posted on Mar 20, 2011

SOURCE: I have a Dewalt DPD3100,

Take the hose off the gun and see if water comes out. If so the gun has to be taken apart and cleaned. Also where the water hose goes in to the machine there is a screen filter which you might have to clean if water is not comming out on the gun side. Use a screwdriver and pry it out carefully around the edges Clean the screen with a wire brush and put it back in and try it.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I have a dewalt dpd3100 pressure washer. Recently started melting the spark plug wire along with air filter housing. What is the cause?

Sounds like the sparkplug wire is bad, and has gotten worse, grounding out to the housing... The burn is caused when the spark jumps the air-gap to ground, or through a damaged wire to ground...
0helpful
1answer
1helpful
2answers

What type of oil do i put in the DPD3100?

In the Pump Dewalt recommends
DeWalt DP70 Pressure Washer Pump OilIn the engine Dewalt Recommends
SAE 10W-30 is recommended for general use
0helpful
1answer

Cam shaft bearings are seized in Dewalt DPD3100 presure washer. does anyone know where to purchase the roller bearings. can not find a part number, do not want to purchase new pump

hi there perrinex22x

here is web site for parts

http://www.ereplacementparts.com/dewalt-dpd3100-pressure-washer-parts-c-1009_7440_7445.html

from diagram looks like not listed as seperate part

may need to remove them and see if your local bearing/ belt store distributor in your area may be able to source them

from list pt number N001194 pump assy is 505 $


sorry

here is another web site that may help for needle roller brgs - give a try

http://www.locateballbearings.com/roller-bearing-suppliers.html


cheers hope it helps pauly46
2helpful
1answer

I have a Dewalt DPD3100, 2 yrs old, never had any problem, water supply hose is attached, water is going in but no water out?

Take the hose off the gun and see if water comes out. If so the gun has to be taken apart and cleaned. Also where the water hose goes in to the machine there is a screen filter which you might have to clean if water is not comming out on the gun side. Use a screwdriver and pry it out carefully around the edges Clean the screen with a wire brush and put it back in and try it.
3helpful
1answer

I need a operating manual for a dp3100. where can i get it?

Go to http://servicenet.dewalt.com/Products/Detail/DP3100#. On the right side there's a Downloads section, pull the scroll button all the way down, the last download listed is your manual. You can either download a PDF or have it emailed to you.
3helpful
1answer

Where do you add the oil on a DeWalt 3100psi pressure washer?

Hi and welcome to FixYa, I am Kelly

From reading everything I can find, i.e User's manual & parts manual the only thing you add oil too is the engine. The pressure pump does not have a liquid sump.

You can look at parts here detail D:
http://www.ereplacementparts.com/dewalt-dpd3100-pressure-washer-parts-c-1009_7440_7445.html

So too add oil to the engine you would remove the dip stick from the crank case located on the opposite of the side of the engine as the oil sensor.

I recommend you use 30 WT SAE oil for 3 oil changes then on the 4th oil change use an HD 30 WT oil. The oil drain plug is located in the center of the side of the engine crank case base. On the 5th Oil change switch back to SAE 30 WT oil. Oil brands are not really important. They all have to meet SAE the same standards to carry the label of SAE. (Yes you can use a generic 30 WT SAE oil )
Thanks for choosing FixYa,
Kelly
0helpful
1answer

How do you check oil in pump on Dewalt DPD3100 pressure washer

There is a little window on the side of the pump to see the oil level but thats normaly the problem None of these companys make there owen pumps or engines i owen serveral power washers if you can tell me more about the problem Iwill likely know how to fix it see who made the pump and the engine and let me know pier_j
1helpful
1answer

My DeWalt Gas Pressure Washer Model DPD3100 is

Hi

Just try the following steps

  • Inspect the water supply connections
  • Inspect the drain hose
  • Inspect the water pump
  • Inspect outer tub for cracks or corrosion
  • Inspect the tub seal
  • Inspect the tub bearing
Good luck

Regards

PCmania

6helpful
2answers

Power washer not starting what type of oil to use dpd3100

10 w 30 for engine

10 w 30 and specify for [PUMP OIL]

ANY AUTO STORE

THANKS AND PLEASE RATE JJ505
Not finding what you are looking for?

316 views

Ask a Question

Usually answered in minutes!

Top Dewalt Garden Experts

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66847 Answers

CJ Rock
CJ Rock

Level 3 Expert

4428 Answers

Are you a Dewalt Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...