Compaq Presario 700 470024-192 Notebook Logo

Related Topics:

A
Anonymous Posted on Apr 27, 2014

How to update wireless dlink model no dsl 2750u router in network connections?

How to add dlink dsl 2750u model no manufacturer's list in compaq wireless network connections router list?

5 Related Answers

bluegreenash

Gareth Cockram

  • 661 Answers
  • Posted on Oct 29, 2007

SOURCE: Network card

This should have a Lan port on the right hand side (next to the modem port)  if this is not present,  then you model does not have one.. (as it was only on selected models)
This Laptop does have a PCMCIA/Cardbus slots so you could buy a PCMCIA Network card (wired or wireless) or you could use a USB Wired or Wireless adapter.

for wireless you will also need a wireless adsl router to connect to your DSL internet

Ad

Anonymous

  • 166 Answers
  • Posted on Aug 25, 2008

SOURCE: no wifi

You need to get a wireless adaptor your laptop did not come with wireless built in. You can get a USB adaptor or a PCMCIA adaptor. Either will work but the pcmcia adaptor will be a little faster

Have a look here

http://www.google.com/products?hl=en&q=pcmcia+wireless+card&um=1&ie=UTF-8&sa=X&oi=product_result_group&resnum=1&ct=title

Hope that helps

Anonymous

  • 188 Answers
  • Posted on Oct 04, 2008

SOURCE: Compaq EVO N400c without wireless capabilities will external wirelss card work?

http://www.everythingusb.com/hardware/index/Linksys_Wireless-G_USB_Network_Adapter.htm

This is just one source. I did a google search for USB wireless adapters. They are used by many users. Generally these units cost the same whether online or at the local Radio Shack, etc. because of shipping.

Anonymous

  • 371 Answers
  • Posted on Apr 14, 2009

SOURCE: cant connect wireless

If the stick is the solution, why are you avoiding the solution?

From what you have said, the internal wifi in the Evo doesn't work, while
an external usb stick does.

Assuming that your internal wifi is properly configured and functional, it is
incapable of picking up your home wifi signal, though it might be functional in other situations ... Buying an external usb stick gives you a better antenna position and takes nothing away from your system, while adding functionality and sheilding the innards of your system from viral
attack as a first line of attack that is detachable.

Buy the USB stick.


Bue

Anonymous

  • 159 Answers
  • Posted on May 27, 2009

SOURCE: Compaq Presario V4000 NOT connecting to a wireless network

buy a wireless device

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have Dlink 2750u modem *** router. I am switching on Hathway ISP. They give DSL connection modem. How to use Dlink 2750?

Use an Ethernet cable to connect from the port on the DSL modem to the WAN/Internet port on the D-Link modem.
0helpful
1answer

A friend of mine has this D-Link DSL-2750U router & is trying to connect his cable internet to the router but failing to do so. We suspect it is a purely ADSL router & does not support ethernet connection...

You need a router which connects to ethernet..ADSL is connected by RJ45(Telephone connection) ... Many cable companies include a router in the Modem (Verizon) others need a router to do wireless which gets connected between the PC and the Modem . the DSL-2750U is well over $2000.00.. a normal wireless router is $50-$100... a regular router gets connected by ethernet to Modem and router ,, then has 4 other connectors .. ehternet to PC.. Also requires power supply. .. wireless has to be setup for the software.
1helpful
1answer

D-Link DSL-2750U N300 ADSL Modem Wireless Router configuration with Hathway

YES THATS TRUE. TO CONFIGURE THE ROUTER. NEED THE PPPOE USERNAME AND PASSWORD FROM THE INTERNET SERVICE PROVIDER. VPI AND VCI SETTINGS.
..THEN ACCESS THE ROUTER PAGE
..GO TO ADVANCE SETUP PAGE.
..THEN LAYER2 INTERFACE
..CLICK ADD
..CONFIGURE THE SETTINGS.
..POWER CYCLE THE NETWORK.
0helpful
2answers

I have a D-link DSL-2750U router worked fine till yesterday, but now its power led keeps on giving a red light it should give green a second or two later but it keeps givings

Reset router. There are two resets. A simple push reboots and holding it in clears all custom settings. Try the first.

This is a quick fix and usually does it. Test with network cable and work your way backwards to modem if you still have problems.
0helpful
1answer

Dsl works when connected directly to laptop, does not work via dlink but airport shows a signal

This is a common problem with this router. Try to update the firmware from dlink.com and reboot the router after the update. Also the range is not great with this router, so you may have problems if you're only in the next room. The only solution with this model - short of getting a different router is to restart the router when there's no wireless connection - sometimes multiple times (turn off for 1 minute, then turn it on again). Besides that there's not much you can do - it's just not a good product.
1helpful
1answer

Cannot connect via wireless to dlink 655. wired connection works fine. when i disconnect to go wireless the laptop sees the dlink but there is no internet connection. running Vista Home Premium. static...

You must manually configure the wireless settings. Go to Network and Sharing Center > Manage Wireless Networks. Remove all the listed network there. Then click Add > Add Network in Range > Select your signal > Type the security if you have and press connect. That should do it.
0helpful
1answer

VPN problem with Dlink DIR-300

Update your firmware to the latest. I had the same issue and the issue is gone after the upgrade.
1helpful
1answer

Wireless router

Yes, you can use wireless router with the modem. I guess the actiontech DSl router that you have is also Wireless one. If so, you can use just the DSL router for wireless connection. If you really want to use Dlink router with it, Connect the ( WAN port ) of the Dlink router to the ( LAN Port ) of the Action tech modem [ modem(LAN)-->Dlink(WAN) ]. Once you do this connection, better to do power cycle ( unplug the pwr to the dlink first, then, disconnect the pwr to action tech - wait 1min and plug the pwr to modem, wait for DSL light to be solid , then put the pwr back to dlink ). Make sure DSL light on the modem solid, internet light & WLAN light on the link glowing.
- Make Hardwire connection between the computer to Dlink and check the ip address on the computer whether it acquires the ip address from Dlink and then check the internet connection on the computer, it has to work. if computer not getting ip from dlink, try restarting computer.
- If hardwire connection on the dlink works fine and check the wireless connection.

For wireless configuration or assistance you may check this link:

http://www.portforward.com/help/wirelessxp.htm


please feel free to ask, if you have any more assistance.

- Laxman
Not finding what you are looking for?

189 views

Ask a Question

Usually answered in minutes!

Top Compaq Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

ExpressFiX
ExpressFiX

Level 2 Expert

691 Answers

Are you a Compaq Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...