Restore network setting

If you can't connect via the Internet to your workplace network from home (or another location), check the items in this list:

• Make sure that you typed the virtual private network (VPN) server name exactly as provided by your network administrator.
  

• You must have an active Internet connection for a VPN connection to work.
  

• If your modem is external, make sure that the modem power is turned on.
  

• Contact your network administrator to make sure that you have the appropriate connection and domain permissions on the remote access server.
  

• This could be a certificate problem. For assistance, contact your network administrator.
  

• A VPN connection won't work with an active Winsock proxy client. Contact your network administrator to make sure the Winsock proxy client is not enabled.
  

• If you know the IP address (for example: 131.107.10.25) of a website, type that address in the address bar of your web browser and press Enter. If this works, there is probably a Domain Name System (DNS) resolution problem. For assistance, contact your network administrator.
  

• If you have special software that's required or installed by your workplace, it could be part of the problem. For assistance, contact your network administrator.
  

• If you know the IP address (for example: 131.107.10.25) of your VPN server, type that address for the VPN connection, and then press Enter. If this works, there is probably a DNS resolution problem. For assistance, contact your network administrator.
  

• There could be a problem with the server you're trying to connect to. For assistance, contact your network administrator.
  

If you try to connect with a VPN connection and you see a message that says "The local computer does not support encryption" and has the error code 741, it's possible that the encryption that your computer uses doesn't match the encryption used by the VPN server. To change the encryption settings so that your computer uses the recommended setting of 3DES, follow these steps:

1. Open Connect to a Network by clicking the network icon ( or ) in the notification area.
   

2. Right-click the VPN connection, and then click Properties.
   

3. Click the Security tab.
   

4. Under Data encryption, select Maximum strength encryption (disconnect if server declines), and then click OK.
   

5. Open Connect to a Network by clicking the network icon ( or ) in the notification area.
   

6. Click the VPN connection, and then click Connect to try connecting again.
   

IP Reset
IP Reset returns the basic network settings to their factory defaults. You can perform this operation from the
base unit or one of the handsets.
The following settings will be reset to their factory defaults:
DHCP setting (restored to DHCP on
• Settings related to static IP addressing (the values for static IP address, subnet mask, default gateway,
DNS1, and DNS2 are cleared)
• DNS settings for DHCP connection cleared


1.2 Reset and Firmware Update
1.2.1 Reset
1.2.1.1 Resetting the Network Settings IP Reset
Performing IP Reset from the phone user interface see 2.1.4 IP Reset restores the basic network settings
made through phone user interface programming or Web user interface programming to their factory defaults.
If the unit is unable to connect to the network after changing network settings, you can restore the network
settings to their factory defaults by performing IP Reset, and then try configuring the settings again. Settings
such as the phonebook data, are not cleared by this feature.
The following settings will be reset to their factory defaults:
• DHCP setting restored to DHCP on
• Settings related to static IP addressing (the values for static IP address, subnet mask, default gateway,
DNS1, and DNS2 are cleared)
• DNS settings for DHCP connection (cleared)
• PHY settings (speed and duplex mode of the either LAN or PC port are restored to "automatic")
• VLAN (Virtual Local Area Network) settings (disabled)
• Terminal number settings (restored to "automatic")
Notice
•
After performing IP Reset, the unit will restart automatically. To avoid problems, it is recommended that
you save your settings before performing IP Reset.
Note
•
If these settings (with the exception of PHY settings and terminal number settings) were made through
Web user interface programming, the set values made through Web user interface programming
remain effective, even if you perform IP Reset. To reset these settings to their factory defaults, perform
Reset Web Settings from the Web user interface again.
Document Version
2010-08
Administrator Guide
www.InternetVoipPhone.co.uk ' [email protected] ' 0800 088 4846
Firmware Update

If these settings (with the exception of PHY settings and terminal number settings) were made through
configuration file programming, the set values made through configuration file programming remain
effective, even if you perform Reset Web Settings.
Resetting the Settings Made through the Web User Interface
(Reset Web Settings)
Performing Reset Web Settings from the Web user interface see Reset to Defaults) resets the
settings made through the Web user interface to their default values.
When you use this feature, the unit will return to the status just after performing the most recent provisioning
or pre-provisioning.
Notice
•
After performing Reset Web Settings, the base unit will restart automatically. To avoid problems, it is
recommended that you save your settings before performing Reset Web Settings.
Note
•
The settings configured through the phone user interface only will not be reset. However, settings that
can be configured through both the phone user interface and Web user interface will be reset.
1.2.2 Firmware Update
You can update the unit's firmware to improve the unit's operation. You can configure the unit so that it
automatically downloads the new firmware file from a specified location. The firmware update will be executed
when the unit is restarted.
For details, see Section 6 Firmware Update.
Provisioning server
Firmware server
Configuration
file
A
Firmware
C
B
A Download
B Check for update
C Firmware download and update
34
Administrator Guide
Docume

The website provider makes available the features observed. For example, website location were each members acquires to customise into personal settings is made available by website provider or network administrator. In a situation that the web administration requires to alter either changing designs or relocating resources makes temporary unavailabilty of website. In such a situation, members on the site are notified about the condition. While a member on sites, conditions that is encountered with personal accounts also temporarily causes least display for restore purposes. Observing that facbook has been blocked has several expectations. First, ascertain from the network administrator of facebook about the condition either as undergoing restore designs or alternate. For example, explore the website to attain the contact details either email addresses or phone numbers. Second, in a situation that each member descides to alter features to personal spaces causes malfunctions. For example, the computer structures or networks devcies at the entities location with malfunctions also hampers facebook from displaying. Once ascertained that facebook has malfunctioned requires to contact entities that have the expertise to restore conditions. Also as a social network requries to inform contacts about the malfunction by an alternative arrangment, telephone emails to capture the network experienes. Occasioinally, devices either hardware or program softwares or the network structures malfunctions causing least impresssions. However, the skilled experts of network administrators, website hosts, service providers once ascertained would restore functionality. Expectations on networks is durations to restore with faulty conditions either as durations system updates or ongoing process of inovation.

There should be a reset either hard,"button" or soft, Plug in the computer and run any software that came with it, Please let me know how you made out, I have been wanting to run my pc movies into my Sammi at the other side of the house, but most of the products I looked at have spotty service at best, There is a new one at Best Buy , that does live streaming in hdmi if you already have the adapter, for lie 60-70 dollars, I will await your response,
Gymowner

Easy, reset the router itself, should have a tiny pin hole in the back that has a button that you must compress, just google reseting your model.
If you have any problems let me know.

LOGIN
There is a login key for the router that can be accessed by opening the
address http://192.168.0.1 as described: after the login all settings inside the router can be changed.
Note: use a wired connection when going into the routers' ip address.

When you can not login with the default password, reset the device:

Restoring the Default Configuration and Password
This section explains how to restore the factory default configuration settings, changing the
router’s administration password to password and the IP address to 192.168.0.1. You can erase the
current configuration and restore factory defaults in two ways:
• Use the Erase function of the Web Configuration Manager.
• Press the WPS button and Wireless button on the side of the router simultaneously. You can
use this method for cases when the administration password or IP address is not known.

Resetting to Factory Default Settings
You can use this method for cases when the administration password or IP address is not known.
To restore the factory default configuration settings:
1. Press and hold the WPS button and the Wireless button on the side of the router until the Test
LED turns on (about 10 seconds).
2. Release the buttons and wait for the router to reboot.

WIRELESS SECURITY + PASSPHRASE
The wireless security is a network name for wireless connection called
SSID: the identification name of your router.
The passphrase is used for a secure password getting permission to have wireless data transfer from the router to the computer and vice versa. ( No internet connection so far: only Local Area Network [LAN] )


MODEM
Because the device is a router / ADSL modem you'r able to setup the
modem part for connection on a telephone line to the internet / Wide Area Network [WAN] .
You should use passwords from the Internet Service Provider [ ISP ] enter and save them in the modem section of the device.


Support for DG834G on the internet:
http://www.netgear.com/Products/RoutersandGateways/WirelessGRouters/DG834G.aspx

Go to control panel open network connections right click the network you want to have on your toolbar click properties now check the two boxes below

Basically Internet connection required a networking connection for multiple number of PCs.There are 5 types of network connection and most simple and common network connection is Local Area Connection.You can use Windows Xp or Vista for your OS, when connection was made set up your lan from your internet server from cd provided by DSLinternet server.You should Have one PC server for your multiple PC as the administrator.If your inernet was configured from your PC server(as administrator) Share your internet using your LAN in each PC using Windows xp follow set up networking clicking additional task and click Home and office networking then follow wisard set up.You Have now internet connection in your multiple PC.

TCP/IP stack repair options for use with Windows XP with SP2 & Vista.

For XP, Start, Run, CMD to open a command prompt.

For Vista, Start, Programs\Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt.

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset TCP/IP stack to installation defaults. netsh int ip reset reset.log

Reboot the machine.

if the Issue presist then you need to try System restore
If Windows XP starts loadTOCNode(3, 'moreinformation'); 1. Log on to Windows as Administrator. 2. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click System Restore. System Restore starts. 3. On the Welcome to System Restore page, click Restore my computer to an earlier time (if it is not already selected), and then click Next. 4. On the Select a Restore Point page(try the date 2 dats prior it was working or the First Bolded Date of that month), click the most recent system checkpoint in the On this list, click a restore point list, and then click Next. A System Restore message may appear that lists configuration changes that System Restore will make. Click OK. 5. On the Confirm Restore Point Selection page, click Next. System Restore restores the previous Windows XP configuration, and then restarts the computer. 6. Log on to the computer as Administrator. The System Restore Restoration Complete page appears. 7. Click OK.

sounds like your comp did its own system restore on you and the file needed to keep parameters of modem connection disapeared
you need to go into control panel network set up wizard follow instructions this should set your network back up
do you have the driver disks for the ether net card reinstall ether net card drivers
never setup network threw internet explorer these ways dont hold