C004c what are the solutions to error code c004c

The store error code 0x80070652 might be displayed for booting errors. There are detailed solutions proposed in the link below.

Solution -

windows error 0x80070652 solution

The Windows error code 43 might be displayed for booting errors. There are detailed solutions proposed in the link below.

Solution - windows Error Code 43 Solution

Here you can find the HP Printer error codes and their solutions

Epson printer error codes and their solutions

and canon printer error code and their solutions.

Ozone Fan is causing this code it is located under the paper registration assy. which is the large assy. attached to the door on the side of the machine where you open it up. It has a large clutch to the rear, sponge looking roller, and a shiny roller two tabs hold it in place two springs underneath. The fan might need to be cleaned or replaced.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

0040 - suction fun motor malfunction problem.Use the vacuum cleaner and clean the ventilators.

OR

Replace the fan at the top of the machine. the one that is at the top, near the optical section.

Corona wires need to be replaced

Look for the ozone filter the fan next to it is bad replace it.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

The C004C is ozone fan motor M8 malfunction.Check various parts for possible overload or change PWB-A if the code persist after reset.From reset open and close the right door,or turn OFF/ON the power switch.