Want to know how i can reformat hp ze 4300

1.right click on mycomputer, then properties,then hardware,then device manager,then double click on
the dispaly adapter, here you will see your motherboard or display adapter model name and number,
2. double click on the soud,video and controller, here you will see your soundcard model name and
number..

if any of the 1 option consists the model name and number is enough tofind your rite drivers, check this and post the model name andnumber to .... [email protected], [email protected] to assist you further...

download your drivers for HP at the given link below.... all the best..
http://www.lostmydrivers.com/

Instructions

1. Step 1 Back up all of the important data on the machine, especially the files in the “My Documents” and “Shared Documents” folders.
   
2. Step 2 Locate the original installation discs for all of the software that is installed on the machine.
   
3. Step 3 Download all of the latest drivers for the computer's hardware from the site of the computer manufacturer or the hardware manufacturer.
   
4. Step 4 Insert the Windows installation disk into the CD-ROM drive and reboot the computer. Press a key to boot from CD when prompted by the installation disc. If the computer continues to boot from the hard drive, follow the instructions in the computer's documentation to set the BIOS to boot from CD first.
   
5. Step 5 Press the “Enter” key at the installation options screen. When the software licensee is displayed, press “F8” to agree to it. The installation will scan the computer’s hard disk for some basic information.
   
6. Step 6 Press the “Esc” button if the software offers to repair the previous Windows XP installation. A list of the hard drive partitions on the system will be displayed.
   
7. Step 7 Select the partition containing the Windows installation. In most cases, it will be the only partition listed, and on others, it will be the largest partition listed. Press the “D” key to delete the partition, and press "L" and "Enter" to confirm the choice.
   
8. Step 8 Create a new partition in the freed space by pressing the “C” key and press “Enter” to make the partition the maximum allowable size.
   
9. Step 9 Select the newly created partition, and press “Enter” to install Windows XP on it. Format the drive to the “NTFS” file system, and follow the prompts to continue the installation. Do not select the “Quick” option, because it may leave certain structures of the old file system intact.
   
10. Step 10 When the new copy of Windows XP boots, it will ask some configuration questions, and then it will begin looking for hardware. Install all of the drivers for the hardware on the system, and reboot the machine as required. Then, install all of the software that will be needed on the computer, and copy all personal files into the new installation.
    
11. Step 11 Ensure that anti-virus software, anti-spyware software, and a firewall are installed and configured correctly. These programs will help to protect the new Windows XP installation and keep it performing well.