How do I find cartridge levels for my HP printer??

If printer is in warranty, demand for replacement.

1. Check ink levels in printer..if levels are showing, take out all ink cartridges refill them.
If levels are zero, go for new cartridges.
2. If ink level are showing in printer & physically cartridges having ink, then problem with print head, try to clean the clogged nozzles.

Checking the ink levels A message will appear on the front panel display when the ink level for the print cartridge is low. The ink levels can also be checked through the HP Director on the computer.Checking the ink levels on a Windows computer

1. From the HP Director , click Settings , Print Settings , and then click Printer Toolbox .
2. Click the Estimated Ink Levels tab. The estimated ink levels appear for the print cartridges.

Checking the ink levels on a Macintosh computer

1. From the HP Director , click Settings , then click Maintain Printer .
2. If the Select Printer dialog box opens, select the HP PSC, and then click Utilities .
3. From the list, select Ink Level . The estimated ink levels appear for the print cartridges.

Method one: Check the ink levels from the idle screen on the color graphics display Look for four icons at the bottom of the color graphics display. The icons represent the ink level remaining in each of the four color ink cartridges: black, yellow, light cyan (blue), and light magenta (pink). A larger and more accurate view of the ink levels can be displayed from the Setup menu. If an ink cartridge containing non-HP ink is being used, a question mark displays instead of the ink drop in the icon for that cartridge. The HP All-in-One cannot detect the amount of ink remaining in ink cartridges that contain non-HP ink. Figure 1: Non-HP ink icon NOTE: HP cannot guarantee the quality or reliability of non-HP ink. Printer service or repairs required as a result of printer failure or damage attributable to the use of non-HP ink will not be covered under warranty. If a hollow ink drop icon displays, the ink cartridge represented by that color icon has very little ink remaining and will need to be changed soon. You might be able to continue printing for a short period of time with ink remaining in the print head assembly. Replace the ink cartridge when the Replace Soon warning message displays on the color graphics display. Figure 2: Low ink level icon When the Empty Ink message appears on the color graphics display, the indicated ink cartridge is out of ink. Replace the indicated ink cartridge. Method two: Check ink levels from the Windows computer The estimated amount of ink remaining in the ink cartridges can be checked from the computer. See the on-screen HP Director Help for information on checking the ink levels from the Printer

1. Open the printer Toolbox. To do so, do one of the following:
   • Open HP Solution Center, click the Settings menu, then point to Print Settings , then click Printer Toolbox .
   • Right-click the HP Digital Imaging Monitor in the tray, then point to your printer model name, and click Display Printer Toolbox .
   The Toolbox opens.
2. Click the Estimated Ink Level tab. The estimated ink level gauges display.

Method three: Check ink levels from the Setup menu

1. Press Setup on the printer control panel.
2. Scroll down and select Display Ink Gauge . The Ink Gauge status from the Tools menu will only display on the color graphics display.

Let me know if you have any other questions. Please rate this solution. Thanks.

Checking the ink levels A message will appear on the front panel display when the ink level for the print cartridge is low. The ink levels can also be checked through the HP Director on the computer. Checking the ink levels on a Windows computer

1. From the HP Director , click Settings , Print Settings , and then click Printer Toolbox .
2. Click the Estimated Ink Levels tab. The estimated ink levels appear for the print cartridges.

Checking the ink levels on a Macintosh computer

1. From the HP Director , click Settings , then click Maintain Printer .
2. If the Select Printer dialog box opens, select the HP PSC, and then click Utilities .
3. From the list, select Ink Level . The estimated ink levels appear for the print cartridges.

Hi,
If the ink level is low in a print cartridge, the Print Cartridge Status light stops flashing when the printer’s top cover is opened. When you open the panel the ink cartridges slide to the center , as far as checking the ink level find and right click on the printer icon, click properties, and find ink cartridges and ink levels.
Thanks
Shereena.

slowly off and on the printer for five times without cartridge, printer saves data of cart of last 5 only so next time it reads full ink..

Here is what I found on the Web. You can click on the link below, to see Full Instructions. If you find this helpful, pls rate me.

http://h10032.www1.hp.com/ctg/Manual/c00687555.pdf

View estimated ink levels
Follow these instructions to view the estimated ink levels of the print cartridges that are installed in the printer:

1. Open the printer Toolbox.
2. Click the Estimated Ink Level tab.

Note If the print cartridges were used before being installed in the printer, the
estimated ink levels will not appear on the Estimated Ink Level tab.
The Estimated Ink Level tab also contains print cartridge ordering information. To view
this information, click the Print Cartridge Information button.

Thanks and good luck.......
Pls rate me

keep the cartidge in Hot Water for 30 minutes. maybe it works.

Deskjet 5100 series

1. Click Start or , click All Programs , click Hewlett-Packard , and then click Printer Assistant .
2. Click Utilities .
3. Click View ink levels .
   • If a cartridge is low on ink, discontinue these steps, replace the cartridge, and then try printing again.
   • If the cartridges contain a sufficient amount of ink, continue to the next step.
4. Click Printer Maintenance .
5. Click Clean Cartridges .
6. Follow the on-screen instructions.

ISSUE: After installing a new HP Inkjet print cartridge, the ink level indicator remains at the previous level. SOLUTION: Continue to print and ignore the ink level indicator. The print cartridge is full of ink, it just is not being measured accurately.

Normally when you install the print software you install HP Director or solution centre software that has a estimated ink staus monitor..from user manual

Check the estimated ink levels You can easily check the ink supply level to determine how soon you might need to replace a print cartridge. The ink supply level shows an estimate of the amount of ink remaining in the print cartridges. Tip You can also print a self-test report to see if your print cartridges might need to be replaced. For more information, see Print a self-test report. To check the ink levels from the HP Director (Windows) 1. In the HP Director (or HP Solution Center), click Settings, point to Print Settings, and then click Printer Toolbox. Note You can also open the Printer Toolbox from the Print Properties dialog box. In the Print Properties dialog box, click the Services tab, and then click Service this device. 2. Click the Estimated Ink Level tab. The estimated ink levels for the print cartridges appear. To check the ink levels from the HP Image Zone software (Mac) 1. In the HP Director (OS 9) or HP Image Zone (OS X), choose Settings, and then choose Maintain Printer. 2. If the Select Printer dialog box appears, select your HP All-in-One, and then click Utilities. 3. From the pop-up menu, choose Ink Level. The estimated ink levels for the print cartridges appear.

Print a self-test report If you are experiencing problems with printing, print a self-test report before you replace the print cartridges. This report provides useful information on several aspects of your device, including your print cartridges.
Load letter, A4, or legal unused plain white paper into the paper tray.

Press and hold the Cancel / Resume button and then press the Start Copy Color button
The HP All-in-One prints a self-test report, which might indicate the source of the printing problem.