Hi.
If one of the heating elements is not heating at all, then
replace the heating element. You can test the heating element reading
Ohms with a multimeter. You disconnect element and read impedance with
multimeter set at Rx1. If the element has no continuity, and the
circuit is open , then the element has blown. In that case you get no
heating at all on one of the elements. Check if either broiling or baking element is not
working.
If heating is poor, then it is the sensor probe.
In
some case replacing the probe does not fix the problem. In that case it
is faulty control assembly. Usually it is the temp probe.
Here parts and diagrams.Regards.
×