How do i get my pictures projected to wthe white screen

projection tvs can display white dots from the dust that is on the reflector mirror your lamp shines the picture on before it is reflected onto the front screen of your tv, one must be very careful when cleaning this, may be worth a service man doing it for you

Projection tvs have a white colored cloth drapped over the pastic screen on the inside for the image to be projected on. This white film may have become unattached on the insid causing the sag.

Seems like the bulb needs replacing.....

Had the same problem with white glows. Followed the directions in this link and the white glows and color brilliance was fixed.

http://www.avsforum.com/avs-vb/showthread.php?t=1148792

What model is your projection TV? Need the model number

Replace all electrolitic capacitors on the Proscan pcb.

I had this problem and replaced the bulb. I have not had the problem since.

Good luck!

check you bulb and your color wheel notorious on this set

go into menu turn color off see if you have a black and white picture if not adjust red,green, and blue screen drive on controls in back of tv you have red, green, blue it will have focus /screen controls cover each tube do one at a time blue focus and screen drive adjust to clear blue picture do all 3 tubes, then adjust them to where you have a black&white picture once this is done turn color controll back on.Thank You for using FixYa and Have a Nice Day.

sounds like poor regulation replace regulator get back too me