I recently bought a Panasonic 32" TC-L32X1. I hooked my xbox elite up to it through the component jacks using the cables and it worked fine. About an hour into a game, the graphics mess up (weirdly colored pixels and areas within the game). I restarted my xbox only to discover that the tv will no longer display the xbox.
To be sure it wasn't the console, I hooked my xbox up to my old tv and it worked just fine. I've never had any problems with it, graphics or otherwise so I know it has something to do with the tv.
I disconnected my xbox from the tv and changed all the settings to default. Then plugged everything in again and it worked fine for about another hour and then it did the same thing. I'm trying to get it to work again but I have no idea what is causing it. It worked fine the few days I had it, no problems, and I didn't change the settings at all.
Any suggestions?
SOURCE: Panasonic 32" HDTV keeps turning off
Check or have a repair tech check connectors AP1 and AP2. Vibration rattles the power supply board (a crappy design, as the board is almost "floating") and causes the wires in the connectors to break, and may make intermittent contact. Heat may also cause intemittent contact. A very common flaw.
SOURCE: can't get xbox 360 to work on tv
u must use 480 p out put on xbox 360 wqith xcounpunt vcable only 720 p with hdmi on this ok boss thx nick so get xbox on reg tv so u can see pic with yellow cable came with then turn back to 480 p mode ok thx nick
SOURCE: Panasonic Plasma TV model TH42PD60U Shuts off power led flashes 7x
There is a software upgrade to address this particular problem. Contact Panasonic to see if the upgrade can be provided to you free of charge.
SOURCE: My panasonic TC-L32X1 has the power light blinking
its a new t.v, send it back and get another one, or contact the Manufacturer for 1year fac and lab warrenty.
Trust me i am the flat pannel guru :)
SOURCE: panasonic lx-32lxd70 lcd tv not working in cyprus?!?!?!
Under the channel setup menu there should be a way to change the input type of the channel. When you go to edit a channel look for this setting. If all your channels are grainy this is probably the solution also.
430 views
Usually answered in minutes!
×