How do I reset my kikkerland cube clock - Kikkerland Office Equipment & Supplies

go to this link and scroll down to where you see (ck20 glow-cube-clock-pdf) click on that its the second down on the left that is the manual hope its the one that helps you out.

with the power & reset buttons of the console on your left, the lid for game cube controllers should be on the left side of those buttons on the console.. the flap will open from the top, swinging anti-clockwise (so from 12'o clock to 9'o clock)

Click the Download Tab and you'll see a pdf manual.
http://www.iliveelectronics.com/products/clock-radios/clock-radio-plays-and-charges-iphoner-ipodr-4.html

I have a scan in of the instructions for the LA78 - not very clear but adequate. If the problem is you don't know how to tun off the radio alarm set icon, hold down the Snooze/Light button 2 secs (blue display will light up)

Turn right 39, then left to 6. I used a screw driver to open the case then reverse engineered the combo.

http://www.timexaudio.com/pdf/T276IB57002_55.pdf

1. Fit the DC power and switch on the appliance by pressing the standby button 2. To set time, press CLOCk button to alternate between 12 and 24 hour format. 3. Press and hold CLOCK button until the set hour flashes on display 4. Adjust time using SKIP/SEARCH 5. Press CLOCK to set the time, same procedure for minute
To set alarm
1. Press AL SET 1/OFF 1 button, then press and hold the same button until the alarm time starts flashing 2. Press SKIP/SEARCH to to set time as above

Try:

OPERATION MANUAL - Lexon www.lexon-design.com/media/manuel/LR111.pdf

If this does not work a google search may bring results.

Simply HOLD down the "CLOCK SET" button for ~3 secs and the time will flash... Rotate the dial around the SNOOZE button to the hour you want; click the "CLOCK SET" button again for the minutes and rotate the dial again... Hit the "CLOCK SET" button one last time and you're done!