Precor 546i low battery indicator

We are FIXYA dot com. We are not Precor and we certainly don't take credit card numbers. By 'charging bat', you mean battery for the display. The battery is mentioned 67 times in the manual. Press CTRL+F and type in 'battery'. Page 39 and 40, looks to be what you need.

https://primofitnessusa.com/wp-content/uploads/2017/01/V3-precorefx-546i-V3-elliptical.pdf

Links to Precor if you need to buy something?

EFX 546i Elliptical Fitness Crosstrainer - Precor (CA)

www.precor.com > en-ca > efx®-546i-elliptical-fitness-...

Durable 6-phase generator system has no contacting parts, reducing friction and wear, and provides 20 levels to tailor workouts with consistent resistance. The 20 ...

Precor EFX 546i Commercial Series Elliptical Fitness ...

www.amazon.ca > Precor-Commercial-Elliptical-Fitness...

The Precor EFT 546i elliptical has an adjustable cross ramp that allows users to select an angle between fifteen and forty degrees. This allows for isolation of the ...

..

I would definitely check the battery first. The battery may not have enough charge to power everything plus the lift motor.

Here's a link to the various 546i models:

Repair Parts for Precor EFX 546i Ellipticals SPORTSMITH net

Drill it down on the left side under "narrow your search" and look for the serial number prefix. This will let you find all the correct parts and information specific to your model and serial number.

Replacement Parts for Fitness Exercise Equipment at SPORTSMITH

Start by checking the voltage output from the battery. I am attaching a link to a video with instructions on how to test a battery.

Video about How to Test Battery

It is located at the front of the machine, under the ramp. http://www.sportsmith.net/images/product_support/precor/Parts%20Diagrams/Commercial%20Equipment/Ellipticals/C546i%20(version%202)(serial%20code%20AA32,%20AAAJ).pdf

It doesn't always say low battery - check the battery first. If the battery is fine, then check the lower board and the incline motor.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/russell_1d1c35fa8a5a0be4

Procedure 6.6 - Troubleshooting the Incline System


See page 34 of this service manual.


http://www.sportsmith.net/images/product_support/precor/Service%20Manuals/Commercial%20EFX/Service%20Manual,%20C546i%20Self%20Powered%20EFX%20(ver%202).pdf

This link will allow you to use your model and serial number to find the correct battery along with the service manual with replacement instructions.

Repair Parts for Precor EFX 546i Ellipticals SPORTSMITH net

This link will show you the diagram for the unit. Please check this for battery location.
http://www.sportsmith.net/images/product_support/precor/Parts%20Diagrams/Commercial%20Equipment/Ellipticals/C546i%20(version%202)(serial%20code%20AA32,%20AAAJ).pdf

you must have an incompetent boyfriend ... chuck him out then throw the machine out on top of him ..

The ramp system has a battery monitoring system. If the battery voltage falls below 11 Vdc when the ramp movement is initiated or the battery voltage falls below 10 Vdc after ramp movement has been initiated, ramp movement will be stopped and gives that error message. The ramp will not be enabled until such time as the battery voltage exceeds the above limits. The battery voltage must be raised to be to correct this problem either by charging or replacing the battery.