SOURCE: correct wiring for a ASTATIC TEARDROP MIKE to a
here is the info you asked for the following is the correct wiring.
Mic Wiring Info
Stock Mic Wiring
1. Ground Shield
2. Audio Yellow
3. Transmit Red
4. Receive Black
5. CH. Up White
6. CH. Down Blue
Turner 4-Wire MIC. Wiring
1. Ground Shield
2. Audio White
3. Transmit Black
4. Receive N/C
5. CH. UP N/C
6. CH. Down N/C
Turner 6-Wire MIC. Wiring
1. Ground Shield & Red
2. Audio White
3. Transmit Blue
4. Receive N/C
5. CH. UP N/C
6. CH. Down N/C
Astatic 4-Wire MIC. Wiring
1. Ground Shield
2. Audio White
3. Transmit Red
4. Receive N/C
5. CH. UP N/C
6. CH. Down N/C
Astatic 6-Wire MIC. Wiring
1. Ground Shield & Blue
2. Audio White
3. Transmit Red
4. Receive N/C
5. CH. UP N/C
6. CH. Down N/C
SOURCE: RCI 2990 WON'T TURN ON IT BLINK AN GO OFF
you have hooked it up backwards. You blew the polarity protection diode. It needs to be replaced.
SOURCE: no transmit rci 2990
Check the RF output transistor, usually heatsinked to the inner chassis, microphone wiring needs to be checked for breaks since it is part of the circuit, sub another if possible.
SOURCE: rci 2990 will not key up.
Bad or incorrectly wired mic (broken wires in mic or cable) OR transmit circuit has failed.
Someone with a Dummy load/watt meter can test this safely.
627 views
Usually answered in minutes!
×